Power Probe VT750 LCD Two Pole Voltage Tester 12 to 750V – AC/DC Automotive Car Voltage Meter Tester Tool for Electric and Hybrid Vehicles

Price: £11.99
(as of Nov 07,2024 19:38:45 UTC – 12-volt batteries you see in most cars run lights and accessories, while the high-voltage system powers motors in drivetrain of electric and hybrid vehicles. Due to high voltage ranges, servicing these vehicles before disconnecting the power can cause serious injury. Ensure the power is disconnected so you can work safely when you use the Power Probe VT750 LCD 2-Pole Voltage Tester Pen. Built-in batteries work to detect AC/DC voltage from 12 to 750 volts, while the retracting insulators around the electric probe tester points prevent accidental shorts between the probes. Reduce the risk of electric shock when you ensure exact voltage levels are at zero. Always used rubber-insulated electric safety gloves and a face shield when testing electricity currents. Warning: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm.
[Service Your Vehicles Safely]: Electric and hybrid vehicles feature battery systems that need to be disconnected to prevent error or shock prior to service; Use the Power Probe VT750 LCD Car Voltage Meter Tester to ensure your battery voltage reads zero before working.
[Reliable Detection for Optimal Safety]: Auto electric tester tool has a voltage rating from 12 to 750 volts and overvoltage protection up to 1000 volts AC/DC.
[Compact Two-Prong Design]: 9.4-inch (23.9cm) fixed probe housing and secondary electrical tester pole work together to prevent false readings and measure accurate, exact voltage (AC/DC) current.
[Quality You Can Trust]: Thick material ensures durability for the volt meter, while the retracting insulators help prevent any accidental shorts between the probes or surrounding objects.
[Easy To Use]: 10 minutes after disconnecting the 12-volt and high-volt batteries, complete a Live-Dead-Live test; Check 12v battery for a baseline, check high-volt battery for a dead or zero reading, then re-verify the electrical meter is still functioning properly by double checking the 12v battery.
)

Reviewer: Rperry01
Rating: 2.0 out of 5 stars
Title:
Review: Cannot test HOT to Ground on GFCI outlets. It trips them immediately.

12-volt batteries you see in most cars run lights and accessories, while the high-voltage system powers motors in drivetrain of electric and hybrid vehicles. Due to high voltage ranges, servicing these vehicles before disconnecting the power can cause serious injury. Ensure the power is disconnected so you can work safely when you use the Power Probe VT750 LCD 2-Pole Voltage Tester Pen. Built-in batteries work to detect AC/DC voltage from 12 to 750 volts, while the retracting insulators around the electric probe tester points prevent accidental shorts between the probes. Reduce the risk of electric shock when you ensure exact voltage levels are at zero. Always used rubber-insulated electric safety gloves and a face shield when testing electricity currents. Warning: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm.
[Service Your Vehicles Safely]: Electric and hybrid vehicles feature battery systems that need to be disconnected to prevent error or shock prior to service; Use the Power Probe VT750 LCD Car Voltage Meter Tester to ensure your battery voltage reads zero before working.
[Reliable Detection for Optimal Safety]: Auto electric tester tool has a voltage rating from 12 to 750 volts and overvoltage protection up to 1000 volts AC/DC.
[Compact Two-Prong Design]: 9.4-inch (23.9cm) fixed probe housing and secondary electrical tester pole work together to prevent false readings and measure accurate, exact voltage (AC/DC) current.
[Quality You Can Trust]: Thick material ensures durability for the volt meter, while the retracting insulators help prevent any accidental shorts between the probes or surrounding objects.
[Easy To Use]: 10 minutes after disconnecting the 12-volt and high-volt batteries, complete a Live-Dead-Live test; Check 12v battery for a baseline, check high-volt battery for a dead or zero reading, then re-verify the electrical meter is still functioning properly by double checking the 12v battery.