Multimeter Clamp Meter, TRMS 6000 Counts Kethvoz Bluetooth Digital Clamp Multimeter AC/DC 400A, Auto Range NCV Voltage Current Tester with Continuity Buzzer Test Ohm Hz Diode Temperature 7200APP

Price: £41.99
(as of Sep 09,2024 09:33:47 UTC – Accurate measur, solid backing for safety & security.
【TRMS 6000 Counts Multimeter】Built-in clamp sensor, true RMS measurement method, can accurately measure DC voltage 0.1mV~600V, AC voltage 1mV~600V, AC and DC current 10mA~400A, resistance 0.1Ω~60MΩ, capacitance 6nF~60mF, frequency 9.999Hz~9.999MHz, temperature -20°C~1000 °C, duty cycle 0.1%~99.9%.
【Bluetooth Connectivity Support】Smart clamp multimeter with built-in bluetooth module and customized software, available to connect with phones or tablet to remotely monitor and save & share measurement data. Useful multimeter data logger for labs, factories and household in appliances troubleshoot or DIY.
【Practical Clamp Meter】With auto-range function, this professional multimeter will select the appropriate decimal point position during measurement and output more accurate measurement results. In addition, there are max/min measurement modes, data hold, low battery indication and auto power off function, the backlit LCD makes it easy to read in dim environments. This is a mini and practical electrical tool for electricians, HVAC technicians and more.
【NCV Detector】Supports non-contact AC voltage detection. Simply hold this voltage tester close to a conductor and the light will come on and sound if the the AC voltage is ≥ 90V. 26 mm jaw calibre, clamps onto an AC line distributor or AC live wire to measure amperage/current without stripping or breaking the wire. Note: Only one wire can be placed in the jaw during measurement.
【Safety first & Overload protection】KE-7200-APP Digital Clamp Multimeter meets safety standards IEC-1010 Double Insulated, CAT II 600V, CAT Ⅲ 300V. All measurement ranges are overload protected. Comes with 12-months warranty and lifetime technical support.
)

Reviewer: Andrew
Rating: 5.0 out of 5 stars
Title: Does the job
Review: Just needed a cheep current clamp and though cat rated will stick with using my 35 year old fluke for hazardous stuff. Temp sensor an added bonus will use to rebalance my central heating radiators. Not sure will use Bluetooth for remote view but nice to have. Only one negative is that I had to rotate function selector a few times to get working, possible grease on contacts, works fine now though so happy with product

Reviewer: andy byram
Rating: 4.0 out of 5 stars
Title: A+++ for DIY
Review: has to be said very good product does all the things you need. Good build quality would recomend. Only thing it doesn’t do is two conductor AC current you need to make a breakout lead .still a very good bit of kit at a decent price

Reviewer: gogo cat
Rating: 5.0 out of 5 stars
Title: bluetooth connection, mobile app enabled
Review: this is a clamp multimeter, it features bluetooth connection to mobile app, so the meter reading could be displayed immediately on mobile screen, and the data could be saved to history, i ordered it all because of this feature and it really helpsit’s quite big in size as there is a clamp with it, the clamp is easy to control with the big trigger, the meter body is around palm size, comfortable to use; there is a main function dial with 5 control buttonsthere is backlight with the display, however it will automatic turn off when there is no operation for a few seconds, it’s quite annoying when i need a bit time setting up something and it suddenly turned off, i rather it stay on until i turn it off or the meter time outthe meter reading is fast and accurate, and i really appreciate that all reading is saved to mobile app, and data/graph could be retrieved anytime, even the meter is offlinei’m happy with this product, would recommend

Reviewer: John Tom Betteridge
Rating: 4.0 out of 5 stars
Title: Clamp meter
Review: Mainly for current readings.

Reviewer: George W
Rating: 3.0 out of 5 stars
Title: Inaccurate
Review: Unfortunately V quiescent reading not zero. Temp reading not zero with no thermocouple connected. Current quiescent reading 1A. Hence returned.

Reviewer: Guray
Rating: 1.0 out of 5 stars
Title: 0.6 Ampers on idle 🙁
Review: Seems bad luck. Clamp Ampermeter measures/shows 0.6 AMP’s, whatever you do, clamp on or not…

Reviewer: Mr D J Meadows
Rating: 5.0 out of 5 stars
Title: An easy to use and versatile multimeter
Review: Kethvoz Bluetooth Clamp MultimeterThe Kethvoz clamp multimeter comes packed in a sturdy cardboard box. Inside you find the meter in its padded zip-up carry pouch, a black and a red probe lead, a temperature probe lead, two AAA cells with a screwdriver to fit the battery compartment and an instruction manual.The Kethvoz multimeter has several ranges some not often found on multimeters. There are seven main ranges available with push buttons to extend some of these and a hold button to freeze the reading if you need to see it after disconnecting the meter. A long push of the same button turns on a backlight for the display. Another handy feature is the ability to link to a phone app via Bluetooth. As well as a direct readout, this app can log the data over a period and produce a graph which can be stored for later reference.The Kethvoz meter is very easy to use, once the measurement type is selected it will auto-range to the correct value of whatever you are measuring. The probe leads are a decent length (about 75cm) and standard type fitting so you could use longer leads if you have them. The body of the meter sits comfortably in the hand and is fairly light with the selection dial easily turned with your thumb (right hand).

Reviewer: JimmyJames
Rating: 4.0 out of 5 stars
Title: Good value clamp meter with some data logging via BT
Review: Clamp meters are pretty useful devices. They allow you to measure current draw across a conductor without contact. So this Kethvoz clamp multimeter with NCV and Bluetooth looks to be a very versatile meter.The multimeter ships in a brown box. Inside you have a case, containing the meter, the temp probe, batteries, guide and small screwdriver, and loose you have the probes. The meter itself is relatively compact and fits easily into a single hand. The construction is plastic but of a reasonable quality. The display is near the base and the rotary selector above it. The case is very basic and only just big enough to put the meter in. It’s fine for storage but it won’t protect anything from fall or impact damage. The probes aren’t the best quality and don’t have any sheaths. Which is a shame as the meter is generally of good quality.Testing the meter I found it read a little high. Nothing significant but around 0.02-3volts. The NCV detection worked well finding live cables without any issue and the temp function seemed reasonably accurate. The clamp function is easy to use and I was able to measure the current across a cable without contact. Though make sure you read the manual and search online to ensure accuracy. The interesting addition is the Bluetooth connection. This allows you to use an APP to monitor and log date collected by the meter. This requires an AP called AI link to be installed. The APP annoyingly requires registration to use and appears to be used for all sorts of different devices. Connecting the meter isn’t too hard and it is useful to see the results on screen. The data logging is a nice addition though the sample rates, though adjustable, might be a little low for some applications.This is a useful versatile mulitmeter. It has its flaws and there are things that could be better. The smart functions are useful but I don’t like the need to register to use them. However you can still use the meter without the APP and it’s made well and fairly accurate. It’s perfect for the hobbyist or as a backup.

Accurate measur, solid backing for safety & security.
【TRMS 6000 Counts Multimeter】Built-in clamp sensor, true RMS measurement method, can accurately measure DC voltage 0.1mV~600V, AC voltage 1mV~600V, AC and DC current 10mA~400A, resistance 0.1Ω~60MΩ, capacitance 6nF~60mF, frequency 9.999Hz~9.999MHz, temperature -20°C~1000 °C, duty cycle 0.1%~99.9%.
【Bluetooth Connectivity Support】Smart clamp multimeter with built-in bluetooth module and customized software, available to connect with phones or tablet to remotely monitor and save & share measurement data. Useful multimeter data logger for labs, factories and household in appliances troubleshoot or DIY.
【Practical Clamp Meter】With auto-range function, this professional multimeter will select the appropriate decimal point position during measurement and output more accurate measurement results. In addition, there are max/min measurement modes, data hold, low battery indication and auto power off function, the backlit LCD makes it easy to read in dim environments. This is a mini and practical electrical tool for electricians, HVAC technicians and more.
【NCV Detector】Supports non-contact AC voltage detection. Simply hold this voltage tester close to a conductor and the light will come on and sound if the the AC voltage is ≥ 90V. 26 mm jaw calibre, clamps onto an AC line distributor or AC live wire to measure amperage/current without stripping or breaking the wire. Note: Only one wire can be placed in the jaw during measurement.
【Safety first & Overload protection】KE-7200-APP Digital Clamp Multimeter meets safety standards IEC-1010 Double Insulated, CAT II 600V, CAT Ⅲ 300V. All measurement ranges are overload protected. Comes with 12-months warranty and lifetime technical support.