KRASER KR52B Double Bridge Security Anchor Anti-Attack, Anti-Extraction Bolts, High Strength Steel, Universal Anti Theft Security for Anchoring Motorcycle to Concrete Ground Floor Wall Garage Parking

Price: £32.98
(as of Nov 12,2024 20:44:50 UTC – From the brand

KRASER ANTI-THEFT PROTECTION

High resistance steel anchor of 5mm thick with double steel arch with the right spacing to prevent attacks. Base and 4 anchor points. Protects the passage of the anti-theft chain to prevent theft of motorcycles, bicycles, scooters, machinery, etc. in garages, basements, private parking lots, etc.
Strong attack-proof steel, resistant against shear, saw, crowbar, hammers, drill, etc. Resistant finish, covered with 2 layers of paint, especially resistant to scratches and oxidation.
4 safety bolts ensure that the anchor can withstand very high levels of force. Attaches to walls and floors using the included stainless steel expansive mounting bolts. Rolling steel balls cover the screws to prevent them from being tampered with or removed.
Suitable for fork locks and the vast majority of chains. Compatible with large diameter chains and steel cables. We recommend the use of the approved chain and mini U kit Ref. KR50100.
German quality and engineering KRASER brand with the guarantee and service of Equipmotor in Spain.
)

Reviewer: Su
Rating: 5.0 out of 5 stars
Title: Make a template before installing in concrete.
Review: Great robust quality I would knock off a mark for the ball bearing ground anchor design but hopefully they’d hold up to a theft scenarioIf you are installing in typical concrete with typical stones embedded please make yourself a template of say 12mm plywood 1st. you can then use this to guide the drill so it doesn’t jump around as it tries to miss these stones, I am a carpenter of many years and have drilled thousands of holes but today that template idea saved my bacon because my concrete just didn’t play ball… I just took a square piece of ply (square on 2 sides) similar size to anchor, offered up the anchor lush with these two sides and marked the centre of the holes and drilled with a wood bit the four holes (the same size as my masonry pilot bit 6mm) then using the square sides to position the template holding firmly drilled the 1st hole, then put an allen key, a bolt or something of the same size through the hole pegging the template in place, holding firmly drill another hole, peg again with something, you could even plug it with a small wall plug and screw for further firmness but you’ll have to drill it out the plug later, drill the rest of the holes with the pilot bit…if you mess up any of the holes when you offer up the anchor you can rectify because you have up to 16mm hole size to do yet, if you do need to realign you can actually redo the template again anywhere on your wooden plank no need to worry about square sides…but this time that forth hole that’s a dogs dinner now needs to be drilled larger maybe 10mm or 12mm, peg the other three holes and try and use that now larger drill and larger template hole to coax over and redrill your misaligned hole basically absorbing your mistake with a larger drillbit… If the others are good you can crack on and progress up the drill sizes as quick as you wish to the 16mm without the template or you can continue to pre drill the temp as you move up sizes. I’d imagine brickwork or cheap concrete won’t need all this fuss.Anyway that’s what I did, and I wouldn’t have managed without a piece of ply ( and a bit of masking tape for marking)

Reviewer: Tomasz
Rating: 5.0 out of 5 stars
Title: Decent quality
Review: Good quality heavy duty but not for Oxford 22mm chain

Reviewer: Ronan A.
Rating: 4.0 out of 5 stars
Title: I am sure it works…..but it is HUGE!!!!!!
Review: I am sure it works…..but it is HUGE!!!!!!

Reviewer: Clive J.
Rating: 5.0 out of 5 stars
Title:
Review: Very strong rigid anchor.Put some super glue on the ball bearings so it will holdthe ball bearing as you start to hammer it in place.

Reviewer: Geoff
Rating: 3.0 out of 5 stars
Title:
Review: Product arrived but all four of mounting bolts where missing..

Reviewer: Igor
Rating: 5.0 out of 5 stars
Title:
Review: Anclaje a suelo o pared muy robusto. Es de muy buena calidad.

Reviewer: Stephanie Cleuvers
Rating: 5.0 out of 5 stars
Title:
Review: Die Größe und die Verarbeitung sind toll

Reviewer: Alessandro
Rating: 5.0 out of 5 stars
Title:
Review: Gancio comprato per assicurare la moto.Il gancio è di dimensioni generose ed è pesante, il che fa presagire solidità e robustezza. Il doppio arco fa si che sia molto più complesso forzarlo attraverso leve o tagliarlo.Viene fornito con tutto l’occorrente per fissarlo.L’installazione è semplice se si ha un po di manualità. Ovviamente per posizionarlo su pietra come nel mio casi sarà necessario l’utilizzo di un tassellatore dato che andrà fatto un foro da 16mm. Una volta fatti i buchi e stretto le viti, le sfere vanno battute nell’inserto della brugola per far sì che non possano essere svitate (sperate quindi di non dover rimuovere in futuro il gancio😅).Il foro permette senza problemi di passare (come nel mio caso) una catena di dimensioni generose.Come ogni dispositivo non garantisce al 100% la protezione della moto ma sicuramente ha un alto livello di sicurezza e forzarlo non sarà semplice né veloce.Prezzo superiore ad altri ganci di altri marchi e anche dello stesso marchio, ma è anche il top della gamma e la qualità ne giustifica il prezzo.Consigliatissimo!

From the brand

KRASER ANTI-THEFT PROTECTION

High resistance steel anchor of 5mm thick with double steel arch with the right spacing to prevent attacks. Base and 4 anchor points. Protects the passage of the anti-theft chain to prevent theft of motorcycles, bicycles, scooters, machinery, etc. in garages, basements, private parking lots, etc.
Strong attack-proof steel, resistant against shear, saw, crowbar, hammers, drill, etc. Resistant finish, covered with 2 layers of paint, especially resistant to scratches and oxidation.
4 safety bolts ensure that the anchor can withstand very high levels of force. Attaches to walls and floors using the included stainless steel expansive mounting bolts. Rolling steel balls cover the screws to prevent them from being tampered with or removed.
Suitable for fork locks and the vast majority of chains. Compatible with large diameter chains and steel cables. We recommend the use of the approved chain and mini U kit Ref. KR50100.
German quality and engineering KRASER brand with the guarantee and service of Equipmotor in Spain.