Gunpla Adjustable Basin Wrench 13-25mm Sink Faucet Remover, Professional Heavy Duty Plumbers Basins Spanner Wrenches for Fixing Union and Back Nuts

Price: £11.98
(as of Aug 03,2024 19:06:35 UTC – Product Description

180°Pivoting head for working around obstructions and continuous engagement with nut for easy ratcheting action

Thandle for easy one handed use and enhanced leverage

Spring loaded jaws: Automatic locking to adapt to different nuts

Gunpla heavy duty plumbers adjustable basin wrenches will help any successfully reach any small space and easily remove sink and faucets. It feautres a 13-25mm adjustable jaws head, a highly non corrosive and rust resistant shaft.

DURABLE MATERIAL: Made of premium quality steel, this Gunpla basin adjustable wrench is crafted with extremely hard material. The fine sink basin wrench construction will keep away your tool from any corrosion rust, even after contact with water on the several occasions during and after serving
SPRING LOADED ADJUSTABLE JAWS: The durable plumbersbasin wrench is designed with spring loaded jaws that can be adjusted by any user to suit each scheduled task for perfect and adequate use. Our adjustable basin wrench can adapt to various pipe nuts and fit lung nuts measuring 13mm to 25mm
EASY AND COMFORTABLE APPLICATION: As an essential tool for use on compression fittings, copper or polythene, on basins, pipes, and baths, our adjustable basin wrench is the perfect tool for hooking up and removing supply lines from the bottom of faucets
SLIDING T-HANDLE: Gunpla widely applicable has well mounted sliding t-handle that ensures the right torque is applied for tightening, loosening back nuts and union nuts of pillar and bath taps located behind basins, sinks and baths
180 DEGREE PIVOTING FLEX HEAD: Pivot the head of the basin wrench at will, perpendicular the shaft, facing the correct position for loosening or tightening nuts. The innovative pivot head holds most positions up to 180 degree, favouring the access to hard to reach nuts and spaces making it easy tighten, remove faucets and fill valve nuts
)

Reviewer: Jim
Rating: 5.0 out of 5 stars
Title: It works
Review: This works, I had a couple of over tight nuts to unscrew under the sink (thanks plumber). Although its tricky to get in place once you do it works. Made changing a couple of taps relatively easy in the end and meant I did not need to pay for a plumber myself

Reviewer: STEVE G.
Rating: 4.0 out of 5 stars
Title: Tap wrench
Review: Wasn’t sure what to expect but it turned out to be a very well made wrench it felt solid in your hand and not likely to break so well worth the money

Reviewer: Nina
Rating: 5.0 out of 5 stars
Title: Best invention ever
Review: I didn’t even know this existed! I bought new taps… I had a wrench and other tools.. Thought installing taps should be easy enough.. Until I realised the tiny gap in the really high cover behind the sink and realised it ain’t ever gunna happen.. Got a few quotes off plumbers and was like umm nope.. So after a quick Google and boom straight to amazon… This bad boy did the job perfectly… I did have a bit of a hissy fit thinking it didn’t work.. But after a quick call to my dad who explained that I have to have it turned a particular way to tighten or loosen..and them bammm.. New taps installed for the tiny price of this amazing little invention… Happy days

Reviewer: Ken Green
Rating: 5.0 out of 5 stars
Title: Did my plumbing job
Review: Brill for pipes in a tight space

Reviewer: John
Rating: 3.0 out of 5 stars
Title: I found the jaws too big.
Review: Tried to undo a back nut on a washbasin tap but the space was too small to lock on the jaws. Too clunky by far.

Reviewer: Amazon Customer
Rating: 5.0 out of 5 stars
Title: Essential tool for fitting taps or even occasional maintenance.
Review:  First impression:👀 If you have ever fitted taps up under a basin, then this is an essential tool for getting a grip of the tap nut and doing it up whilst the supply pipe is in the way. It will not get used very often, but when you need one of these, nothing else will do the job well. The wrench is about 12” long with a bar at one end for applying some leverage, and the jaws at the other end. The jaws are spring loaded and rotate so they can be positioned for tightening and undoing. I found it easier to spread the jaws around the pipe to guide the wrench up to its intended target.What I liked:✔️ The dimensions are just right for gaining access to the taps under the sinks in my house. If the wrench is too long then it just gets in the way.✔️ The jaws grip well and although serrated, wont damage your taps.✔️ The T-bar is long enough to apply leverage and slides to either side of the bar.Anything I didn’t like so much:❌ Nothing. The wrench worked just fine.Conclusion:✅ It is difficult to show the wrench in use, as the places that you really need this for are tight, mostly inaccessible spaces up under the sink. I used the wrench to tighten up the nut that holds the tap to a basin that had worked loose over the years and it was effective. I just had to remember to flip the jaws into the correct orientation for tightening up the tap. It is robust enough and the spring jaws work well to get an initial grip. I have a project coming up to replace some taps and I am very glad to get hold of one of these. Recommended.Thanks for taking the time to read my review, I hope you found it helpful.

Reviewer: Erin Phillips
Rating: 4.0 out of 5 stars
Title: Good
Review: Does the job.

Reviewer: Fire-Blade
Rating: 5.0 out of 5 stars
Title: Gunpla Adjustable Basin Wrench 13-25mm
Review: If you’ve ever needed to change the taps on a basin and then wondered how you undo the nuts located deep in the small recesses of the ceramic then a tool such as this one from Gunpla is ideal.This particular tool is made entirely from steel and has a 26.5cm shaft with a sliding T-handle on one end and a pivoting spring loaded head on the other. The bottom jaw of the head is flat, whilst the top is curved – both of them have teeth and this combination allows them to grip onto nuts or even pipes.***** In The Box *****1 x Basin Wrench***** Installation / Usage *****Using the tool is pretty self-explanatory – simply flip the head to the side (one side for tightening and the other for loosening), pull the jaw open and hook it over the nut/pipe. You can then turn it using the handle.The wrench is suitable for nuts that measure between 13mm to 25mm and the harder you turn the tool, the tighter it will grip due to the camming design.***** Conclusion *****Instead of struggling when changing basin taps, a handy tool like this makes things soo much easier.It seems pretty well made and being made of steel, should be nice and strong.For less than £10, I think it offers pretty good value for money and definitely worth considering – particularly for the home user.

Product Description

180°Pivoting head for working around obstructions and continuous engagement with nut for easy ratcheting action

Thandle for easy one handed use and enhanced leverage

Spring loaded jaws: Automatic locking to adapt to different nuts

Gunpla heavy duty plumbers adjustable basin wrenches will help any successfully reach any small space and easily remove sink and faucets. It feautres a 13-25mm adjustable jaws head, a highly non corrosive and rust resistant shaft.

DURABLE MATERIAL: Made of premium quality steel, this Gunpla basin adjustable wrench is crafted with extremely hard material. The fine sink basin wrench construction will keep away your tool from any corrosion rust, even after contact with water on the several occasions during and after serving
SPRING LOADED ADJUSTABLE JAWS: The durable plumbersbasin wrench is designed with spring loaded jaws that can be adjusted by any user to suit each scheduled task for perfect and adequate use. Our adjustable basin wrench can adapt to various pipe nuts and fit lung nuts measuring 13mm to 25mm
EASY AND COMFORTABLE APPLICATION: As an essential tool for use on compression fittings, copper or polythene, on basins, pipes, and baths, our adjustable basin wrench is the perfect tool for hooking up and removing supply lines from the bottom of faucets
SLIDING T-HANDLE: Gunpla widely applicable has well mounted sliding t-handle that ensures the right torque is applied for tightening, loosening back nuts and union nuts of pillar and bath taps located behind basins, sinks and baths
180 DEGREE PIVOTING FLEX HEAD: Pivot the head of the basin wrench at will, perpendicular the shaft, facing the correct position for loosening or tightening nuts. The innovative pivot head holds most positions up to 180 degree, favouring the access to hard to reach nuts and spaces making it easy tighten, remove faucets and fill valve nuts