Diment Power Universal Surface Grinding Dust Shroud for Angle Grinder 115mm / 125mm

Price: £27.19
(as of Sep 19,2024 10:27:49 UTC – From the brand

Diment Power

Minimize dust during sanding for a clean workspace!

Diment Power Dust Shroud

Diment Power Dust Shroud

☆ Applications: Grinder dust shroud sitable for different surfaces,paint, marble, concrete, tiles, walls
☆ Applicable model: angle grinder dust extraction suitable for the front cover of most 48-51mm angle grinders. Can be installed on more than 95% of 100mm/115mm/125mm angle grinders
☆ Ring brush with spring: There is a ring brush with spring on the edge. Even if the dust cover is not completely flat or the polished surface is very uneven, moving the dust cover can make you work normally, which can effectively prevent dust from escaping
☆ The interface size is the same as that of European vacuum cleaners. All standard vacuum valves can be easily connected without other accessories; made of glass-filled nylon, with wear resistance and long life
☆ Equipped with accessories: 1 elbow wrench (easy and quick to install), 3 tightening connections (allowing to install the hood on angle grinders of different brands.), 1 x 5.5 mm washer, 1 steel ring.
)

Reviewer: DC647
Rating: 5.0 out of 5 stars
Title: No More Dust
Review: Worth the investment excellent product fitted the grinder no problem just fit the correct spacer ring attach your dust extractor. Easy to use no excellent performance no dust escaped was surprised just how much dust was created when I opened the extractor to empty it.

Reviewer: gordon murray
Rating: 5.0 out of 5 stars
Title: Simple and effective, I wish I’d bought this earlier
Review: Bought this for a job profiling 3’x2′ paving slabs, fabricating an access ramp for my elderly parents’ garden, after I’d previously choked on the copious clouds of cement dust I was producing, coating everything in the garden, myself, and next door. Not realising then just how unhealthy breathing this dust actually is.A direct easy push fit for my trusty old entry level Draper angle grinder. Although several adapter rings are also provided to accept fitting to other manufacturers’ equipment.Also included is an offset disc key, handy to reach into the recessed centre of the grinding disc, otherwise out of reach inside the shroud with my angle grinder’s original flat profile key.The shroud’s brush skirt is sprung, keeping a good seal around the workpiece while grinding, efficiently containing the dust.The grey front part of the shroud rotates 90° to the side, to allow working right up into the edge of an upright, eg on stairs.The soft rubber tapered hose adaptor facilitates attaching a wide range of manufacturers vacuum hoses, to extract the problematic silicate dust that can injure the lungs, caused me difficult coughing fits.An experience this device is thankfully designed to prevent.All in all, a handy piece of kit, that I only now realise what I have been missing.

Reviewer: christopher wright
Rating: 4.0 out of 5 stars
Title: removes most dust.
Review: The dust shroud only just fitted to my bosch angle grinder with me filing off a piece of plastic , to enable the disk to reach the work surface.Once fitted though it, works very good when attached to a shop vacuum cleaner.

Reviewer: Scott Smith
Rating: 5.0 out of 5 stars
Title: Well made and fits several angle grinders
Review: Great attachment and collected dust easily

Reviewer: Happy customer
Rating: 3.0 out of 5 stars
Title: Looks cool but hoover didn’t fit
Review: Looks cool but hoover didn’t fit

Reviewer: Timothy D.
Rating: 5.0 out of 5 stars
Title: Good product
Review: This dust extraction cover does an excellent job it’s quick to fit and gives an excellent seal on the work area. The the firm brushes around the rim of the unit do a very good job of keeping the angle grinder flat helping to give a good finish

Reviewer: P. A. Wike
Rating: 1.0 out of 5 stars
Title: Rubbish – Centre collar had melted and crumbled within an hours use
Review: I was very please with this for the first 45 minutes – it was working as expected if not better. Great for dust collection.I was very disappointed to see that the centre collar had decided to melt with the heat from my grinder, not only did it melt but it started to break up and put loads of black melted debris all over my grinder and floor from the centre collar – in my opinion this is dangerous when this happens as the item could easily become unstable and hit the spinning disc !I was going to return this but i had ordered this just over a month ago where it sat waiting to be used until yesterday … disappointed is an understatement

Reviewer: Osric Tentacle
Rating: 5.0 out of 5 stars
Title: Works really well
Review: The instructions were pretty brief, but it was easy to fit and once attached to my vacuum, which was also straightforward with the adaptor included, did a brilliant job at sucking up the dust. This was despite the fact that I’m working on curved surfaces so the dust shroud never fully encloses the job – it is still enough to remove the vast majority of the dust. A massive improvement on the hell I was living with before! Highly recommend this product.

Reviewer: DecSteph
Rating: 5.0 out of 5 stars
Title:
Review: Produit vraiment efficace pour mes travaux de rénovation ! J’ai utilisé cette protection pour retirer les défauts restants sur le sol après avoir buriné l’ancien carrelage posé par les anciens propriétaires. Avant, avec le disque seul, la poussière devenait ingérable en à peine 2 minutes, rendant la visibilité nulle. Mais avec cette protection, c’est un vrai miracle : plus de poussière (à condition d’utiliser un bon aspirateur de chantier). Un seul bémol, il faut faire attention car ma meuleuse (PWS 780-125) a tendance à chauffer fortement après environ 30 minutes d’utilisation. En résumé, un excellent produit qui a grandement facilité mes travaux !PS : Le produit est également fourni avec le système d’adaptation, ce qui permet de l’utiliser avec un grand nombre de meuleuses, un vrai plus

Reviewer: H.
Rating: 5.0 out of 5 stars
Title:
Review: Tenía muchas dudas por que las veces que he repasado hormigon el polvo es una barbaridad, pues increíble lo bien que funciona la cubierta, no levanta prácticamente ninguna nube de polvo conectado a una aspiradora sin bolsa normal.

Reviewer: phpcs
Rating: 5.0 out of 5 stars
Title:
Review: Le tuyau de 35 mm de mon aspirateur se branche directement sur la sortie d’aspiration. Très efficace.

Reviewer: Naffets
Rating: 5.0 out of 5 stars
Title:
Review: Die Absaughaube ist sehr praktisch. Passt durch die vielen mitgelieferten Reduzierstücke gut auf den Winkelschleifer. Mit dem Anschluss an den Staubsauger ist ein weitgehend staubfreies arbeiten gegeben. Auch hier werden eine Vielzahl von Anschlüssen für den Staubsauger mitgeliefert, sodass verschieden Staubsaugermodelle verwendet werden können. Die Haube ist aus Kunststoff und daher sehr leicht. Würde das Produkt wieder kaufen.

Reviewer: nicoletta
Rating: 5.0 out of 5 stars
Title:
Review: Montato su smerigliatrice angolare Bosh professional, al momento usato per ribassare degli scalini in cemento su cui montare del rivestimento in gres. la capacità aspirante potrebbe essere anche leggermente migliorata, ma laa marcia in più è data dalla possibilita di aprire parzialmente la cuffia per fare sì che il disco sia libero di molere per tutta la sua dimensione. Molto soddisfatto dell’acquisto.

From the brand

Diment Power

Minimize dust during sanding for a clean workspace!

Diment Power Dust Shroud

Diment Power Dust Shroud

☆ Applications: Grinder dust shroud sitable for different surfaces,paint, marble, concrete, tiles, walls
☆ Applicable model: angle grinder dust extraction suitable for the front cover of most 48-51mm angle grinders. Can be installed on more than 95% of 100mm/115mm/125mm angle grinders
☆ Ring brush with spring: There is a ring brush with spring on the edge. Even if the dust cover is not completely flat or the polished surface is very uneven, moving the dust cover can make you work normally, which can effectively prevent dust from escaping
☆ The interface size is the same as that of European vacuum cleaners. All standard vacuum valves can be easily connected without other accessories; made of glass-filled nylon, with wear resistance and long life
☆ Equipped with accessories: 1 elbow wrench (easy and quick to install), 3 tightening connections (allowing to install the hood on angle grinders of different brands.), 1 x 5.5 mm washer, 1 steel ring.