5 x SabreCut SCMPA5 160mm 5.5mm 6mm 6.5mm 7mm 8mm Impact Driver Masonry Hammer Drill Bit Set

Price: £6.99
(as of Aug 10,2024 09:29:27 UTC – SabreCut Extreme professional quality Masonry Drill Bits specifically designed for use with impact drivers and Hammer Drills.

1/4″ Power Groove masonry bits for use in Impact Drivers. Fully hardened chrome alloy steel body and a high quality Tungsten Carbide tip enables these bits to drill a range of masonry type materials including Soft Brick, Concrete and breeze block. These bits turn a normal Impact driver into a masonry drill, ideal for drilling holes for wall plugs and small anchor fixings. Can be used in a impact driver or Hammer drill with a universal chuck. Dual-cutter for concrete and stone applications. Effective bore dust removal due to tip and flute design. Easy positioning thanks to the centring tip.

Package Contents:
– 5 x SabreCut Impact Driver Masonry Hammer Drill Bit Set 160mm SCMPA5

Multi-Function Masonry Drill Bits
– Application: Masonry and Concrete
– Self centring tip
– Dia: 5.5mm 6.0mm 6.5mm 7.0mm 8.0mm
– Overall Length: 160mm
– Working Length 110mm
– Tungsten Carbide Tip
– Use Rotary & Impact Modes
– Fast Drilling in Concrete & Masonry
– For drilling holes for wall plugs & anchor fixings
– 1/4″ Hex Drive Quick-Change Shank
– Designed for Impact Drivers

Compatible with the following manufacturers:
Any Impact Driver or Hammer Drill accepting a 1/4″ Hex.

5 piece SabreCut Masonry Hammer Drill Bits
SabreCut Extreme professional quality Masonry bits specially designed for use with Hammer Drills and Impact Drivers. Forged tip for greater impact resistance and a longer lifetime
Fully hardened chrome alloy steel body and a high quality Tungsten Carbide tip. Ideal for drilling a range of masonry type materials including Soft Brick, Concrete and Breeze block
These bits turn a normal Impact driver into a masonry drill, ideal for drilling holes for wall plugs and small anchor fixings
Professional quality Impact Driver and Hammer Drill Bits
)

Reviewer: Mr R W J Wray
Rating: 5.0 out of 5 stars
Title: Great product
Review: Used these today and they are really good quality for the price!!!!

Reviewer: SP Owen
Rating: 4.0 out of 5 stars
Title: Just the job
Review: These are a good length and just the job although in my set there were two of the same size, meaning I was missing a size

Reviewer: Amazon Customer
Rating: 5.0 out of 5 stars
Title: Good quality.
Review: Good item at a good price.

Reviewer: Critical OG
Rating: 5.0 out of 5 stars
Title: All raw plug sizes in a handy pack
Review: Not seen this before every raw plug size masonry drill bit in one handy pack and these things are sharp, I used the 5.5mm to put up an antenna and you gotta be so careful as before you know it these things will have gone through your house, they eat bricks and make a decent hole. I didn’t even have to put any pressure on the drill. Also a bonus and a brilliant idea is the hexagon shaped ends that go in your drill, nowadays with these twist to tighten systems with no Chuck this is a welcome addition as there is no danger of the drill bit spinning if it comes loose. Highly recommended and easy five stars. Best Amazon purchase in a while.

Reviewer: Annette Garnett
Rating: 5.0 out of 5 stars
Title: Excellent quality
Review: These masonry drill bits are brilliant. Nice size and go through masonry like a hot knife through butter. Would highly recommend

Reviewer: Jamie
Rating: 4.0 out of 5 stars
Title: Good delivery
Review: Great item good delivery

Reviewer: Snoopy
Rating: 3.0 out of 5 stars
Title: Unmm
Review: Very flexible and not true. I little bent. Ok for the price.

Reviewer: A A.
Rating: 5.0 out of 5 stars
Title: Great quality, matches the DEWALT bits I previously purchased.
Review: So I can safely say that after using these bits for some time now that they are very high quality. I previously purchase a Dewalt pack that looked very similar (dare I saw Sabre Cut are imitating the yellow brand).I would buy them again but the only “problem” is the ones I have are going fine with my every day use so there is no need at the moment.I would categorise myself as a heavy DIY/ light commercial user.PS: I’ve purchased some other screwdriver bits and extension from the same brand and been very happy with them too.

Reviewer: Derklugscheisser
Rating: 5.0 out of 5 stars
Title:
Review: Top bohrer.

Reviewer: dionestis78
Rating: 5.0 out of 5 stars
Title:
Review: Buono rispetto al costo D’acquisto

Reviewer: Jonna
Rating: 1.0 out of 5 stars
Title:
Review: Man kann damit kaum bohren bzw. kommt überhaupt nicht durch da die voll schnell ausglühen.

Reviewer: Stefano
Rating: 3.0 out of 5 stars
Title:
Review: Dato il prezzo è stato un tentativo. Ora sulla longevità delle punte di per se non saprei ma la metà è completamente storta, installate in più trapani il risultato è ovviamente il medesimo, la punta gira come un verdiscio! Ovviamente falserebbe il foro vanificando quindi la sua misura. NO!

Reviewer: Andrea
Rating: 2.0 out of 5 stars
Title:
Review: La qualità del materiale è molto scadente e le misure non sono standard

SabreCut Extreme professional quality Masonry Drill Bits specifically designed for use with impact drivers and Hammer Drills.

1/4″ Power Groove masonry bits for use in Impact Drivers. Fully hardened chrome alloy steel body and a high quality Tungsten Carbide tip enables these bits to drill a range of masonry type materials including Soft Brick, Concrete and breeze block. These bits turn a normal Impact driver into a masonry drill, ideal for drilling holes for wall plugs and small anchor fixings. Can be used in a impact driver or Hammer drill with a universal chuck. Dual-cutter for concrete and stone applications. Effective bore dust removal due to tip and flute design. Easy positioning thanks to the centring tip.

Package Contents:
– 5 x SabreCut Impact Driver Masonry Hammer Drill Bit Set 160mm SCMPA5

Multi-Function Masonry Drill Bits
– Application: Masonry and Concrete
– Self centring tip
– Dia: 5.5mm 6.0mm 6.5mm 7.0mm 8.0mm
– Overall Length: 160mm
– Working Length 110mm
– Tungsten Carbide Tip
– Use Rotary & Impact Modes
– Fast Drilling in Concrete & Masonry
– For drilling holes for wall plugs & anchor fixings
– 1/4″ Hex Drive Quick-Change Shank
– Designed for Impact Drivers

Compatible with the following manufacturers:
Any Impact Driver or Hammer Drill accepting a 1/4″ Hex.

5 piece SabreCut Masonry Hammer Drill Bits
SabreCut Extreme professional quality Masonry bits specially designed for use with Hammer Drills and Impact Drivers. Forged tip for greater impact resistance and a longer lifetime
Fully hardened chrome alloy steel body and a high quality Tungsten Carbide tip. Ideal for drilling a range of masonry type materials including Soft Brick, Concrete and Breeze block
These bits turn a normal Impact driver into a masonry drill, ideal for drilling holes for wall plugs and small anchor fixings
Professional quality Impact Driver and Hammer Drill Bits