UK DEALS

Laptop NVMe M.2 Heatsink with Nano Thermal Pads and Mounting Screw,Heat Sink Copper for 2280 M2 SSD, No Rubber Ring Required

61is1H0TtuL. SL1500 613je0uK5RL. SL1500 71GhO3gmS9L. SL1500 71lSjEPVJaL. SL1500 81eWDPbg4jL. SL1500 814oxL2SUxL. SL1500 81l9EI EsiL. SL1500
Price: £7.99
(as of Jan 07,2025 02:15:01 UTC – 100% copper material and a compact 0.02 inch (0.5 mm) thickness, but it has a better heat dissipation effect than aluminum construction, so it is a good measure for high performance SSDs.
【Universally Fit】- This NVMe M.2 heatsink compatible with M.2 2280 SSD . It’s universally fit for laptops and desktop computers, Perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc. Also for Play station 5 heat dissipation.
【10-20°C Cooling Effect】- 0.02″ Thickness copper theatsink, designed for the compact space of laptops, with 10-20°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling.
【Materials and Workmanship】- 100% copper, Hard disk heat sink is made of red copper with a thermal conductivity of up to 401W (m.k), cut and polished, high performance thermal heatsink.
【Thermal Pad】- Providing 2pcs nano thermal pads 0.5mm/0.8mm thicknesses with high performance 5W m.K, compatible with uneven surfaces.
【Packing includes】-1*Laptop m.2 2280 copper heatsink + Nano thermal pad thicknesses 0.8mm and 0.5mm + 2*m.2 Screw + 1*Screwdriver + 1*Laptop sled
)

Reviewer: Ravi
Rating: 5.0 out of 5 stars
Title:
Review: Good product for the price

Reviewer: SreViewer
Rating: 4.0 out of 5 stars
Title:
Review: I think the general theme across reviews for this heatsink is that it’s better than nothing and fits in tight places. I had the same experience as other reviewers with a significant drop in temperature about 15%, using synthetic benchmarks. It fits into a Asus rog G14 / Zephyrus 14, mounted to a Samsung 970 EVO Pro with no bulging.

Reviewer: ぷちぷち
Rating: 4.0 out of 5 stars
Title:
Review: Dell G3 15 3500 のm2SSDは2230TYPEが装着されており2280へ換装するために、購入いたしました。きれいに収まり、放熱効果も大丈夫なようです

Reviewer: Gaffer
Rating: 4.0 out of 5 stars
Title:
Review: ID: B0CMTBVV6MDescription: Awxlumv Laptop NVMe M.2 Heatsink with Nano Thermal Pads No Coil Fixing Required Heat Sink Copper for 2280 M2 SSD LaptopBrand: AwxlumvQuantity: 1231203 | 231221 | 240107TLDR Summary: Not ‘High Performance’, but effective and better than nothingWith this installed on a NVME PCIe Gen 3 and being monitored while ATTO is doing a series of tests, highest surface temps are down from 143° F (61° C) to 77° F(25° C), and operational sensor temps are down from 65° C (149° F) to 35° C (95° F).Peak Operational Surface Temps: without @ 61° C ; with @ 25° C (143° F / 77° F)Peak Operational Sensor Temps: without @ 65° C ; with @ 35° C (149° F / 95° F)Idle sensor temps: without @ 22° C ; with @ 11° C ( 71° F / 52° F)These are not the best numbers I have seen when applying a passive sink, but certainly better then nothing at all.The trick is to use the thermal pads that put the sides of the plate at the PCB, even flush with it, but not past it. Then take the time to ensure the center of each chip is covered by a thermal pad for maximum effect. Also make sure you have removed the protective film on both sides of the copper plate before placing it in the pads and installing it in the computer – if it has a bluish tint on either side, the film is still on that side – and will not only negate the heat dissipation, but might cook your M.2This was performed on an OptiPlex 5060 SFF (D11S) with a PCIe 3.0 4x NVMe Class 40 Self Encrypting Opal 2.0 Solid State Drive (SSDPEKKF256G7L) and no active case cooling, only transient air flow from the CPU squirrel fan.

Reviewer: Amazonカスタマー
Rating: 3.0 out of 5 stars
Title:
Review: 薄い銅製のヒートシンクです。WD SN700に装着しましたが表面積も増えないため、通常タイプのヒートシンクよりも効果はイマイチです。装着前の温度の平均(約20時間)が44℃ほどで、装着後の温度の平均(約15時間)が41℃なのでないよりはマシといった程度です。それでも普通のヒートシンクが装着できないノートパソコンやminiPC用には良いです。

Buy Now

100% copper material and a compact 0.02 inch (0.5 mm) thickness, but it has a better heat dissipation effect than aluminum construction, so it is a good measure for high performance SSDs.
【Universally Fit】- This NVMe M.2 heatsink compatible with M.2 2280 SSD . It’s universally fit for laptops and desktop computers, Perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc. Also for Play station 5 heat dissipation.
【10-20°C Cooling Effect】- 0.02″ Thickness copper theatsink, designed for the compact space of laptops, with 10-20°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling.
【Materials and Workmanship】- 100% copper, Hard disk heat sink is made of red copper with a thermal conductivity of up to 401W (m.k), cut and polished, high performance thermal heatsink.
【Thermal Pad】- Providing 2pcs nano thermal pads 0.5mm/0.8mm thicknesses with high performance 5W m.K, compatible with uneven surfaces.
【Packing includes】-1*Laptop m.2 2280 copper heatsink + Nano thermal pad thicknesses 0.8mm and 0.5mm + 2*m.2 Screw + 1*Screwdriver + 1*Laptop sled