KAHEIGN 15Pcs Hot Glue Sticks, 270 x11mm Black Hot Melt Glue Sticks for Car Body Dent Repair Remover Crafts DIY Home Office Projects

Price: £8.99
(as of Nov 11,2024 03:02:21 UTC – KAHEIGN 15Pcs 270 x11mm Black Hot Glue Sticks suitable for the surface of automobiles, metal plates, refrigerators, washing machines, etc, but also for crafts, artificial flowers, models, plush toys, PC boards, electronic parts, leather goods, ceramic tiles, plastics, woodworking wood, cardboard, etc.

Feature:
– Made of environmentally friendly EVA material, non-toxic and harmless, high viscosity with fast adhesion.
– The melting point of the black dent repair glue stick is 150℃~160℃, the softening point is 120℃, not easy to melt.
– Compatible with 60W and 100W glue guns, easy to operate, no paint repair, easy to remove.

How To Use:
1. Clean the dents with a clean, damp cloth.
2. Put the glue stick into the glue gun, pull the trigger to make the glue stick enter the glue gun, turn on the power and warm up for 5 minutes.
3. Use a suitable pull gasket. Larger dents require larger stretch shims. (Note: The larger the pull-out gasket, the greater the pull-out force).
4. Pull the trigger and apply the extruded glue to the extrusion gasket (the 4 holes of the gasket should be coated with hot melt).
5. Use a hot melt adhesive to quickly place the pull tab in the center of the dent and gently press until the glue cures and sticks (allow the glue to cool for about 8 minutes. The cooling time should be less than 10 minutes and should be slightly shorter). winter).
6. Align the T-shaped repairer and pull the washer with hot melt adhesive and pull the slide back to pull up the dent.
7. Check with the circuit board. If the dent still exists, tap it gently with a flat hammer or pen.
8. Clean the repaired area with a clean, damp cloth.

Specification:
Material: EVA
Size: 270 * 11mm
Colour: Black
The softening point: 120℃
The melting point: 150℃~160℃

Packing Included:
15 x Glue Stick.

[High quality] Made of environmentally friendly EVA material, non-toxic and harmless, high viscosity with fast adhesion, suitable for removing car dents without leaving any residue or causing paint to fall off
[High temperature resistance] The melting point of the black dent repair glue stick is 150℃~160℃, the softening point is 120℃, not easy to melt, suitable for fixing electronic components and PC boards
[Easy to use] Compatible with 60W and 100W glue guns, easy to operate, no paint repair, easy to remove, just use alcohol and clean damp cloth to clean the residue
[Size] 270 x 11mm, after installing the glue stick on the glue gun for 5-8 minutes, put the glue on the pull ring, then put it on the dent, use the tool to pull the ring, and finally remove the glue with special remover
[Applicable] Suitable for the surface of automobiles, metal plates, refrigerators, washing machines, etc, but also for crafts, artificial flowers, models, plush toys, PC boards, electronic parts, leather goods, ceramic tiles, plastics, woodworking wood, cardboard, etc
)

Reviewer: Taffey Lewis
Rating: 5.0 out of 5 stars
Title: Very good, bonds very very well.
Review: Excellent PDR sticks, quite runny as they should be, you won’t get these to release from the panel without alcohol or meths.

Reviewer: Matt
Rating: 4.0 out of 5 stars
Title: Good, but beware melting point
Review: Good glue for light duty tasks.Smooth finish possibleNote, this seems to melt at lower temps & if exposed, can melt in the sun

Reviewer: Mr G Greenfield
Rating: 5.0 out of 5 stars
Title: Excellent quality. Great price
Review: Does the job well

Reviewer: John Williams
Rating: 5.0 out of 5 stars
Title: Glue
Review: Excellent goes a long way

Reviewer: Tomasz Adamek
Rating: 3.0 out of 5 stars
Title: Missing sticks 🙁
Review: Two stick are missing. Hole at the bottom corner of the bag.

Reviewer: MR TERRY GARDNER
Rating: 5.0 out of 5 stars
Title: Good price, works well.
Review: Good price.

Reviewer: T.W
Rating: 1.0 out of 5 stars
Title: Doesn’t stick strongly enough to work
Review: Tried several times in decent temperatures at the end of last summer. Couldn’t get glue to adhere strongly enough to be able to pull the dent out.

Reviewer: Amazon Customer
Rating: 4.0 out of 5 stars
Title: Not bad glue sticks
Review: I used these with a dent puller on my car.The good quality white ones hold better, although there is not a lot in it.So good value for the money overall I’d say.

Reviewer: der_ebs
Rating: 5.0 out of 5 stars
Title:
Review: Funktioniert einwandfrei

Reviewer: Louay Khalil
Rating: 5.0 out of 5 stars
Title:
Review: I have bought these many times and I will definitely buy more when I need. When heated properly they are so smooth and glossy. Strong , very very strong 💪. Very impressed.

Reviewer: Iets verkeerd geleverd.
Rating: 5.0 out of 5 stars
Title:
Review: Perfect

Reviewer: Fabius
Rating: 5.0 out of 5 stars
Title:
Review: Questo tipo di colla è adatta per tirare i bolli causati dalla grandine nelle auto. Ottimo prodotto

Reviewer: Benjamín
Rating: 5.0 out of 5 stars
Title:
Review: Fantástico !!

KAHEIGN 15Pcs 270 x11mm Black Hot Glue Sticks suitable for the surface of automobiles, metal plates, refrigerators, washing machines, etc, but also for crafts, artificial flowers, models, plush toys, PC boards, electronic parts, leather goods, ceramic tiles, plastics, woodworking wood, cardboard, etc.

Feature:
– Made of environmentally friendly EVA material, non-toxic and harmless, high viscosity with fast adhesion.
– The melting point of the black dent repair glue stick is 150℃~160℃, the softening point is 120℃, not easy to melt.
– Compatible with 60W and 100W glue guns, easy to operate, no paint repair, easy to remove.

How To Use:
1. Clean the dents with a clean, damp cloth.
2. Put the glue stick into the glue gun, pull the trigger to make the glue stick enter the glue gun, turn on the power and warm up for 5 minutes.
3. Use a suitable pull gasket. Larger dents require larger stretch shims. (Note: The larger the pull-out gasket, the greater the pull-out force).
4. Pull the trigger and apply the extruded glue to the extrusion gasket (the 4 holes of the gasket should be coated with hot melt).
5. Use a hot melt adhesive to quickly place the pull tab in the center of the dent and gently press until the glue cures and sticks (allow the glue to cool for about 8 minutes. The cooling time should be less than 10 minutes and should be slightly shorter). winter).
6. Align the T-shaped repairer and pull the washer with hot melt adhesive and pull the slide back to pull up the dent.
7. Check with the circuit board. If the dent still exists, tap it gently with a flat hammer or pen.
8. Clean the repaired area with a clean, damp cloth.

Specification:
Material: EVA
Size: 270 * 11mm
Colour: Black
The softening point: 120℃
The melting point: 150℃~160℃

Packing Included:
15 x Glue Stick.

[High quality] Made of environmentally friendly EVA material, non-toxic and harmless, high viscosity with fast adhesion, suitable for removing car dents without leaving any residue or causing paint to fall off
[High temperature resistance] The melting point of the black dent repair glue stick is 150℃~160℃, the softening point is 120℃, not easy to melt, suitable for fixing electronic components and PC boards
[Easy to use] Compatible with 60W and 100W glue guns, easy to operate, no paint repair, easy to remove, just use alcohol and clean damp cloth to clean the residue
[Size] 270 x 11mm, after installing the glue stick on the glue gun for 5-8 minutes, put the glue on the pull ring, then put it on the dent, use the tool to pull the ring, and finally remove the glue with special remover
[Applicable] Suitable for the surface of automobiles, metal plates, refrigerators, washing machines, etc, but also for crafts, artificial flowers, models, plush toys, PC boards, electronic parts, leather goods, ceramic tiles, plastics, woodworking wood, cardboard, etc