Angle Grinder Dust Collection Attachment Cutting Dust Shroud for 100/125/150mm Angle Grinder, 90/115/125mm Saw Disc
Price: £25.09
(as of Oct 20,2024 00:05:42 UTC – Specification:
Material: PC + Metal
Applicable Size: 4/5 inch
Applicable Models: 100/125/150mm angle grinder
Cutting Disc Diameter: 115/125mm
Installation Inner Diameter: Clamping 41-54mm
Dust Tube Diameter: ID 32mm, OD 35mm
Cutting Depth: 3-27mm adjustable
Dimension: 17.8×15.8 / 7.0×6.2in
Installation Instructions:
1. Adjust the installation inner diameter of the cover according to the outer diameter of the head
2. Loosen a hexagon socket screw outside the machine body
3. Install the cover on the head of the angle grinder
4. Tighten the pipe clamp screw
5. Tighten the hexagon socket screws on the bracket
Package List:
1 x Dust Cover
SUIT SIZE: Fits 100/125/150mm angle grinders and 90/115/125mm saw blades.
WIDE USE: The dust cover is suitable for dry hanging marble, wall, floor, concrete dust-proof cutting, kitchen table, fiberglass resin board cutting.
FUNCTION: Captures up to 95% of airborne dust, angle grinder cutting without dust.
COVER SIZE: Cutting depth: 3-27mm adjustable, cutting disc diameter: 115/125mm, installation inner diameter: clamping 41-54mm.
TRANSPARENT: Transparent PC shell for improved visibility and durability.
)
Reviewer: Amazon Customer
Rating: 2.0 out of 5 stars
Title: It won’t Fit 115 mm grinder
Review: This is a cheap dust extraction cover for an angle grinder but I did expect it to fit. I’ve got 115 mm disk B&D grinder and to get it to fit I had to make 3 modifications. One button head screw changed for countersink screw. Make a new 2mm spacer to raise the dick away from unit. The supplied one was very small and probably for a small grinder. Remove 2mm from o/d the B&D bottom disk spacer. If I did not have a lathe in my garage I could not have fitted the to my grinder. I would say this out the box won’t fit most grinders because the supplied spacer is completely useless. Don’t buy. I’m in a fortunate position to make it fit with 2 hours work. It looks like it will now work well but have not tried it yet as waiting for extraction unit.To sum up you can get this to fit but it’s a lot of work. It’s not that well made. Look elsewhere. It is cheap though and that’s it’s saving grace.Update: a few weeks later. With the modifications I made this works very well reducing the dust by 75%. Mainly all the airborne dust. In fact I didn’t even need a mask. The only dust that does escape is heavy and falls to the ground.You may get lucky and it fits. If your not you better be prepared to make some mods.
Specification:
Material: PC + Metal
Applicable Size: 4/5 inch
Applicable Models: 100/125/150mm angle grinder
Cutting Disc Diameter: 115/125mm
Installation Inner Diameter: Clamping 41-54mm
Dust Tube Diameter: ID 32mm, OD 35mm
Cutting Depth: 3-27mm adjustable
Dimension: 17.8×15.8 / 7.0×6.2in
Installation Instructions:
1. Adjust the installation inner diameter of the cover according to the outer diameter of the head
2. Loosen a hexagon socket screw outside the machine body
3. Install the cover on the head of the angle grinder
4. Tighten the pipe clamp screw
5. Tighten the hexagon socket screws on the bracket
Package List:
1 x Dust Cover
SUIT SIZE: Fits 100/125/150mm angle grinders and 90/115/125mm saw blades.
WIDE USE: The dust cover is suitable for dry hanging marble, wall, floor, concrete dust-proof cutting, kitchen table, fiberglass resin board cutting.
FUNCTION: Captures up to 95% of airborne dust, angle grinder cutting without dust.
COVER SIZE: Cutting depth: 3-27mm adjustable, cutting disc diameter: 115/125mm, installation inner diameter: clamping 41-54mm.
TRANSPARENT: Transparent PC shell for improved visibility and durability.
