LLPT Double Sided Tape Heavy Duty Mounting Tape 50mm*5m*0.8mm Acrylic Foam Double Stick Tape Waterproof Strong Adhesive Tape for Automotive Wall Home Office Decor(G592550mm)

Price: £11.99
(as of Sep 19,2024 20:41:05 UTC – The surfaces should be thoroughly cleaned with a 50:50 mixture of isopropyl alcohol and water. Accomplished when temperature is between 70° and 100°F (21°-38°C) and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended.
【APPLICATIONS】Very high bonding strength can withstand moderate to heavy mounting objects; it is safe and extremely reliable on smooth surfaces that this tape is widely used for trims, car registration plates, name plates, address plaques, signs, emblem, car holders, mosquito/bug screen, metal mailbox, mirrors, hangers, tooth brush holder, photo frames and other automotive home office decorations.
【PRODUCT FEATURES】A double coated pressure sensitive adhesive and suitable for wide variety of substrates including lower surface energy materials and smooth surfaces, such power coated paints, glass, marble, plastic, tile, wood and lamination; but not good to heavy textured surfaces and painted walls (taken off paints while removal). Excellent temperature resistance, water moisture resistance, permanent and industrial strength.
【PRETREATMENT GUIDELINES】For maximum bond strength, the surfaces should be thoroughly cleaned with a 50:50 mixture of isopropyl alcohol and water. Ideal tape application is accomplished when temperature is between 70° and 100°F (21° and 38°C) and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended.
【INSTALLATION】Clean and dry surface first, wipe with ADHESION PROMOTER if some surface does not work well, apply the tape to objects (warm up the adhesive if weather is too cold) and let it cure for 12 hours then stick to the walls with pressure, the viscosity will gradually increase over time and reaches a maximum holding strength after 72 hours.
【PEEL OFF BACKING & TAPE REMOVAL】Use nail or a knife to cut out the backing film a little bit or pinch and stretch a corner of the adhesive until the backing liner lifts from the tape for easier liner removal of backing. Refer to the instruction or contact us for more details. Remove the tape with adhesive remover, spray the adhesive remover around the bonding surface, scrap the tape and residue with plastic scrapper for a neat removal.
)

Reviewer: Huw L JENKINS
Rating: 5.0 out of 5 stars
Title: Just the job.
Review: Very stick and has helped re-secure the wingmirror covers on my VW T5.1 van where the retaining tabs had snapped off.

Reviewer: Amazon Customer
Rating: 4.0 out of 5 stars
Title: Excellent customer service
Review: Review edited: although the tape I bought didn’t do the job, customer service was excellent in dealing with the situation and coming up with a solution.Initially I bought it because of all the good reviews and I have no doubts it works, unfortunately I got a bad batch which I know it can happen.

Reviewer: Littlestars
Rating: 5.0 out of 5 stars
Title: Better than branded names
Review: Done my research and tried this. In its tests against all other branded double sided sticky tape this was 1st and 2nd best on all 5 different tests. It costs a bit more but it works.I used it for fixing rubber to a campervan, it does not budge you would think it was screwed down. The next one to use if you don’t choose this is 3M but it is not as good as LLPT tape.You have the option to return it in 30 days, but you probably won’t. To loosen it if you need the take it off use isopropyl alcohol and WD40 this will eventually remove all the adhesive

Reviewer: Louise W
Rating: 1.0 out of 5 stars
Title: NOT FIT FOR PURPOSE
Review: I WAS VERY DISAPPOINTED WITH THIS DOUBLE SIDED MOUNTING TAPE FROM LLPT, THIS LLPT PRODUCT IS VERY LOW QUALITY AND LOW BOND, AND FAILED EVERY ATTEMPT I USED IT ON.FRANKLY THIS IS NOT GOING TO BE A VIABLE CHEAPER OPTION FOR YOU OVER TAPES LIKE 3M OR 3M’S FAR SUPERIOR QUALITY AND BOND.JUST TO NOTE I WAS USING THIS IN 100% IDEAL CONDITIONS, WARM WEATHER, ON IDEAL SURFACE, PLASTIC UPVC TO A CLEAN GLOSS PAINTED SURFACE, I LIGHTLY SCOURED THE 2 SURFACES FOR BETTER ADHESION, CLEANED WELL WITH ALCOHOL WIPES, DRIED AND STUCK THE SURFACES TOGETHER WITH THE LLPT DOUBLE SIDED MOUNTING TAPE, I EVEN USED A GLUE ROLLER TO HELP BOND THE 2 SURFACESMIND YOU THIS PROJECT I WAS WORKING ON WAS NOT EVEN A HEAVY STRUCTURAL TYPE SITUATION OR EVEN LOAD BEARING OBJECT, JUST A COSMETIC UPVC 150MM STRIP OF PLASTIC FROM FLOOR TO ABOUT 2.2 METER UP A PERFECTLY CLEAN GLOSS PAINTED WOODEN DOOR EDGE SO IT ONLY NEEDED TO KEEP IT ON THE VERTICAL FRAME AND NOT EVEN STOP IT SLIPPING DOWN AS IT WAS FULLY SUPPORTED ALREADY ON THE FLOOR!! ALL IT NEEDED WAS IT TO STICK AND STOP IT FALLING OVER..YET IT STILL FAILED.INITIALLY ALL SEEMED PERFECT BUT INSIDE 2 HOURS THE PARTS SUDDENLY FAILED AND THE UPVC TRIM FELL IN AN ARCING MOTION TO THE FLOOR. I RE APPLIED AND IT HAPPENED AGAIN INSIDE AN HOUR,FRANKLY SOME CHEAP DOUBLE SIDED STANDARD CARPET TAPE OR DOUBLE SIDED PACKING TAPE WOULD HAVE WORKED BETTER, HOWEVER I GAVE UP WITH THE LLPT BRANDED STUFF AS IT WAS POOR IN EVERY WAY AND I PURCHASED SOME 20MM 3 M TAPE 2 STRIPS AND IT WORKED FIRST TIME WITHOUT FAILURE LLPT I USED 2 STRIPS OF 50MM TAPE AND THE 3M WORKED WITH 2 STRIPS OF 20MM TAPE. 3M WON AND PROVED ITS WORTH. SO BUY CHEAP BUY TWICE IS A REAL THING, SO I DO NOT RECOMMEND LLPT.I DO NOT RATE THIS LLPT TAPE, TOUCHING THE RUBBER SURFACE JUST DID NOT FEEL STICKY ENOUGH AT ALL, UNLIKE THE 3 M STUFF THAT STUCK HARD TO MY FINGER AND TOOK SOME REAL PULLING TO GET OFF.DISCLAIMER,IT SEEMED LIKE THE LLPT GLUE HAD DRIED OUT AND GONE OFF OR EXPIRED SO THE ADHESIVE WAS SIMPLY NO LONGER EFFECTIVE OR GOING TO BOND, WHICH MAKE ME QUESTION THE LONGEVITY OF THE PRODUCT EVEN IF THE TAPE HAD NOT DRIED OUT,IN DEFENCE OF LLPT THE MOUNTING TAPE AMAZON SENT ME WAS NO LONGER SEALED IN ITS PACKING CORRECTLY AS IT WAS BADLY TORN OPEN SO THIS MIGHT BE WHY IT FAILED OR THE GLUE HAD DRIED OUT AS IT WAS OPEN TO THE AIR FOR WHO KNOWS HOW LONG,AT THE TIME I NEVER REALLY THOUGHT THE TORN OPEN PACKING COULD EFFECT THE PERFORMANCE BUT IT MIGHT HAVE IF ITS BEEN SITTING ON THE AMAZON SHELF FOR A YEAR OR 2 WHO KNOWS?.I AM NOT SURE HOW LONG THIS HAS A SHELF LIFE ONCE OPENED, BUT IF THIS IS THE REASON FOR ITS LACK OF ADHESIVE PERFORMANCE THEN THIS MIGHT BE SOMETHING TO THINK OF WHEN YOUR PURCHASE THIS PRODUCT AND OPEN THE PACKET, IT MIGHT BE WORTH RE SEALING IT IN A ZIPLOCK TYPE BAG OR A SMALL VACUUM SEAL BAG WITH AS MUCH AIR REMOVED AS POSSIBLE TO MAINTAIN AS LONG AS POSSIBLE SHELF LIFE.THIS MAKES ME PONDER IF I HAD HAVE GOT A FRESH SEALED TAPE NOT DAMAGED OR OPEN TO THE ELEMENTS WOULD I BE HERE TODAY SO DISAPPOINTED, WOULD I HAVE BEEN LEAVING A POSITIVE REVIEW? I AM UNLIKELY TO RISK THROWING MY MONEY AWAY AGAIN TO TEST THIS IDEA.

Reviewer: Steve1982
Rating: 5.0 out of 5 stars
Title: Holds really well
Review: This tape is really good, I suspect those who moan about it, didn’t follow the instructions. You need to clean the area it’s to be applied to, with rubbing alcohol first. I’ve used to add a trim to a bathroom mirror and it’s stuck really well, despite the steamy environment.

Reviewer: angie perry
Rating: 5.0 out of 5 stars
Title: Easy to use
Review: Very easy to use and it seems a really good “stick”. Used it to stick toilet roll holder to wall and its staying stuck. Good value for money.

Reviewer: Kelsie A H
Rating: 3.0 out of 5 stars
Title: Didn’t work for me
Review: I tried to use this as I’ve used similar 3m tape in the past and it didn’t adhere well at all. I wanted to hang up my new spider catcher brush which is very light, as the adhesive the catcher came with didn’t work on the wall. I tried this and it seemed to work at first but by the next day the spider catcher was on the floor.Might use for other surfaces or purposed, but didn’t work for a simple job for me.

Reviewer: Us3
Rating: 4.0 out of 5 stars
Title: Goodbye nails, glues and screws…
Review: A simple review: I used the 50mm x 5m tape. Although it says “foam”, it’s not like the double-sided foam pads – this stuff is a beast.Originally intended to use in our shed to stick insulation panels to the walls (I didn’t want to drill them as its a plastic shed) – I’ve found many more uses since.A little goes a long way – and it just gets stronger.It coped with sticking foil lined insulation to the walls of our plastic shed with ease… and whilst I was in there and there was some left, I stuck a battery strip light to the ceiling too. That was in August, and it’s still stuck solid there now we’re in November.I’ve used a lot of small strips too for securing stuff in the home, e.g. a powered USB hub stuck to the underside of my oak tabletop – again, still going strong. And most surprisingly, I used the tape to fix some SSDs to the inside of my PC case and they’ve stayed stuck even with heat. Previous supplied 3M sticky tape had failed several times.Overall, for £12 (price at the time of review) this seems expensive, but for me it’s been well worth it. There’s still a fair chunk left too.Recommended.

Reviewer: Matthias Hartig
Rating: 5.0 out of 5 stars
Title:
Review: Das Produkt hält was es bespricht, die Klebekraft ist sehr gut und ich würde es weiter empfehlen!

Reviewer: Hardy
Rating: 5.0 out of 5 stars
Title:
Review: Macht genau was es soll !

Reviewer: Robert L.
Rating: 1.0 out of 5 stars
Title:
Review: Leider hält das Klebeband nicht was es verspricht.Ich habe es auf eine Messerleiste geklebt. Auch nach Anleitung zwei Tage in Ruhe gelassen.Dann meine 8 Küchenmesser an die Magnetleiste gehängt.Am nächste Tag lag die Leiste mit Messern unten. Die Messer sind nicht besonders schwer . Eswar auch kein Küchenbeil oder sonstig schweres Gerät auf der Leiste. Ich habe dann zwei dünne Silikon Streifen auf die Messerleiste aufgebracht und sie über Nacht mit Tape fixiert.Nun kann ich die Messer und ev. auch noch sämtliche Küchenmaschinen daran aufhängen. Hält wirklich bombenfest mehrere Kilo.Also spart euch das Geld.Bisschen handelsüblichen Silikon verwenden und fertig.Wenn’s hilft…gerne!

Reviewer: ManfredK.
Rating: 3.0 out of 5 stars
Title:
Review: Das doppelseitige Klebeband ist ok. Plakatrahmen auf einer Acrylplatte “montiert” – hält gut, aber nach wenigen Monaten muss nachgeklebt werden. Durch Hitze und Sonneneinstrahlung lässt die Klebekraft doch nach.Verlängerungskabel mit 3er Steckdosenleiste überkopf geklebt – hält ebenfalls nur bedingt. Werde eventuell mal eine andere Marke probieren.

Reviewer: Sean
Rating: 5.0 out of 5 stars
Title:
Review: This tape is super strong and I highly recommend

The surfaces should be thoroughly cleaned with a 50:50 mixture of isopropyl alcohol and water. Accomplished when temperature is between 70° and 100°F (21°-38°C) and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended.
【APPLICATIONS】Very high bonding strength can withstand moderate to heavy mounting objects; it is safe and extremely reliable on smooth surfaces that this tape is widely used for trims, car registration plates, name plates, address plaques, signs, emblem, car holders, mosquito/bug screen, metal mailbox, mirrors, hangers, tooth brush holder, photo frames and other automotive home office decorations.
【PRODUCT FEATURES】A double coated pressure sensitive adhesive and suitable for wide variety of substrates including lower surface energy materials and smooth surfaces, such power coated paints, glass, marble, plastic, tile, wood and lamination; but not good to heavy textured surfaces and painted walls (taken off paints while removal). Excellent temperature resistance, water moisture resistance, permanent and industrial strength.
【PRETREATMENT GUIDELINES】For maximum bond strength, the surfaces should be thoroughly cleaned with a 50:50 mixture of isopropyl alcohol and water. Ideal tape application is accomplished when temperature is between 70° and 100°F (21° and 38°C) and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended.
【INSTALLATION】Clean and dry surface first, wipe with ADHESION PROMOTER if some surface does not work well, apply the tape to objects (warm up the adhesive if weather is too cold) and let it cure for 12 hours then stick to the walls with pressure, the viscosity will gradually increase over time and reaches a maximum holding strength after 72 hours.
【PEEL OFF BACKING & TAPE REMOVAL】Use nail or a knife to cut out the backing film a little bit or pinch and stretch a corner of the adhesive until the backing liner lifts from the tape for easier liner removal of backing. Refer to the instruction or contact us for more details. Remove the tape with adhesive remover, spray the adhesive remover around the bonding surface, scrap the tape and residue with plastic scrapper for a neat removal.