HERZO Universal Surface Grinding Dust Shroud for Angle Grinders 115/125mm

Price: £28.99
(as of – From the brand

HERZO

HERZO

Kit fits 90% Main Brands with a 4.5″/5″ Angle Grinder
)

Reviewer: SS
Rating: 5.0 out of 5 stars
Title: works well
Review: Great for keeping the disc at a set level, reduces dust to a tolerable level. Still require a mask but its definitely an improvement. The vacuum adaptor is a bit short but duct tape holds it all together.

Reviewer: Amazon Customer
Rating: 4.0 out of 5 stars
Title: Very Useful – But needed tweaking to fit the DeWalt Grinder with easy adjustable collar
Review: Really useful, saved a huge amount of dust when levelling my kitchen floor. Two things that I found problematic though, one the brushes fitted when using a 110mm Grinding Disc meant you really had to force the grinder down to compensate for the high of the brush, either that or grab a small spacer to bring the head of the disc closer to the floor.Secondly and maybe more troublesome was that even though its a universal fit, I had to grind out a small piece to get it to fit the DeWalt Grinder ( with easy adjustable collar ) taking out a 10mm x 5mm notch did the trick, wasted an hour getting it to fit, but offset by the big cost saving for a DeWalt Branded Shroud.

Reviewer: tumixas
Rating: 5.0 out of 5 stars
Title: Was shockingly surprised how well it works
Review: Bought for one project – it does exactly what it says – 0 dust !!!! Money well spent to improve healthy workflow without breathing harmful concrete dusts . Well designed and very handy gadget to have in a toolbox . Very easy to put on a grinder .

Reviewer: Dar K.
Rating: 5.0 out of 5 stars
Title: Works well
Review: Great product on first time use. Does leak a little dust as it’s universal it’s to be expected, but great for DIY occasional use.

Reviewer: Chris
Rating: 3.0 out of 5 stars
Title: Sure it works in othe rsituations
Review: I bought this to try and keep the dust down whilst raking out old pointing inside a fireplace and cleaning the bricks.Sadly in this situation, the shroud was too large to let the blade of the 115mm diamond disk reach the brickwork. Then later on when using a large wire wheel cup brush mean that the dust was not caught by the attached vac.I am sure in a surface grinding application the shroud will work well. Since I have now used the item I am planning to modify it by cutting the plastic so that a 115mm blade will protrude from the edge of the shroud.

Reviewer: Jeff
Rating: 5.0 out of 5 stars
Title: It worked.
Review: I had to grind a ridge in my concrete kitchen floor. Ready to lay new laminate. I bought this shroud in the hope of minimising the dust that would be kicked up during grinding concrete. I was very sceptical of it working. How wrong I was. Not a spec of dust escaped the shroud. Well worth the expense.

Reviewer: Amazon Customer
Rating: 4.0 out of 5 stars
Title: So far has provided good dust collection for my angle grinder on concrete
Review: Initially I purchased a branded shroud for my angle grinder to try and level an uneven concrete floor in my garage. Unfortunately, it did not fit the angle grinder so was returned.I therefore took a risk of buying the HERZO at approx. 1/2 the cost of the branded one, therefore not expecting too much.To my surprise it was relatively straight forward to fit the shroud to my Dewalt DCG412. There are three slotted spacers to choose from if the neck of your angle grinder is too thin and the gap around the shroud needs reducing. The shroud threaded clip fastening is easy to use and can be further tightened with the nut. The rubber hose for the hoover to shroud attachment is not perfect but I managed with some gaffer tape to secure my Henry Hoover without too much effort and so dust collection is perfectly acceptable. Overall little dust escapes which meant I wasn’t having to move all items outside of the garage before work commenced.The shroud has a section that can be turned away from the top to allow close work to the edge of walls etc. The fitting of the hoover hose close to the right side of the angle grinder really only allows dust extraction to the right, therefore I could use only use the angle grinder side handle on the front left but again a minor issue.I would have probably given the item a 5 but for the hoover attachment.Personal choice – As the concrete cutting disc wore down I added a couple of ordinary washers to lower the disc closer to the shroud edge – obviously making sure they were right diameter and safety wasn’t compromised!

Reviewer: Mr Crisp
Rating: 5.0 out of 5 stars
Title: Works better than expected!
Review: I wasn’t hoping for much from this as it was competitively priced, but I was mistaken.It worked really well when grinding concrete, so much so that the vacuum it was connected to was clogged up really quickly with dust. Meaning it’s going in the vacuum rather than everywhere else.You’ll need a good extractor but this works really well to contain grinding dust!

Reviewer: David M
Rating: 5.0 out of 5 stars
Title:
Review: Doet wat het moet doen aan een goeie prijs

Reviewer: Flo
Rating: 5.0 out of 5 stars
Title:
Review: Es tut seht gut sein Arbeit. Immer wieder gerne. 1A Empfehlung!

Reviewer: Bildörr Skydd
Rating: 5.0 out of 5 stars
Title:
Review: I was astonished at how effective this was. No dust at all. Well worth the money.

Reviewer: Adri Duque
Rating: 5.0 out of 5 stars
Title:
Review: Adapta muy bien y cumple perfectamente con su función. El cepillo que tiene alrededor de donde se coloca el disco se adapta solo en altura, evitando que se escape el polvo

Reviewer: Francesco G.
Rating: 5.0 out of 5 stars
Title:
Review: il prodotto è buono e ha funzionato a dovere sul mio Bosch. Il venditore è SUPER: ho acquistato mesi prima dell’utilizzo e al momento dell’apertura ho notato che mancavano gli adattatori. Quando ho chiesto di poter acquistare gli adattatori come ricambio, mi ha spedito un prodotto nuovo completo immediatamente. Grazie mille!!!!

From the brand

HERZO

HERZO

Kit fits 90% Main Brands with a 4.5″/5″ Angle Grinder