Toolwiz Circlip Pliers Snap Ring Pliers Internal Snap Ring Plier – 90 Degree Bent Nose Circlip Plier Long Nose Cylinder Pliers for Trucks Motorcycles Cars
Price: £9.99
(as of Aug 17,2024 01:26:40 UTC – Product Description
Internal Cylinder Snap Ring Plier Long Nose Pliers Master Cylinder– Snap Ring 90 Degree Long Nose Pliers for Trucks Motorcycles Cars
90° Angled tip internal snap ring pliers make it easier to access hard to reach snap ringsHigh carbon steel finish has a tough and protective clear coating to help protect against corrosionLong nose pliers master cylinder retaining ring remover can be used on a variety of internal snap rings or circlipsSnap ring pliers can be used on 3/8 in to 2 in internal snap rings
Quality Spring
Constructed from high carbon steel which is widenly used to remove and install small snap rings up to 2″/53mm deep on the hydraulic master cylinders on motos/cars/trucks
Strong Tips
The long nose pliers set designed for easy reach into the narrow space with considerate size, ensuring you a more precise contorl of the snap ring removal
Anti-slip Handle
With ergonomic handles, the snap ring 90 degree long nose pliers can provide overall control and instant holding power. No more extra hassle works
Internal Cylinder Snap Ring Plier 90 Degree Bent Long Nose Pliers
Snap ring 90 degree long nose pliers are designed to remove and install the most common types of circlips and snap ring retainersThis heavy duty snap ring removal tool features high carbon steel which makes it durable and long-lastingThis long nose pliers master cylinder features friendly plastic dipped handle for easy and non-slip comfortable grip
Product Details Length: 6.6″ Tip: 90 Degree Material: Carbon steel Length of jaws: 2″ Diameter of small tips: 0.06″ Maximum of opening jaws: 0.67″
Add To Basket
Add To Basket
Add To Basket
Add To Basket
Add To Basket
Customer Reviews
4.0 out of 5 stars
223
4.6 out of 5 stars
1,381
4.5 out of 5 stars
2,489
4.5 out of 5 stars
2,489
4.5 out of 5 stars
84
Price
£9.99£9.99 £9.99£9.99 £16.99£16.99 £15.99£15.99 £43.99£43.99
Usage
Internal cylinder snap ring plier Hose clamp repairing Universal lug wrench Universal lug wrench Socket storage
Fitment
Universal Universal Universal Universal 1/4″, 3/8″, and 1/2″ Drive Socket (NOT Fit for Impact Sockets)
Size
90 Degree Max opening 1.38in/35mm 7-19mm & 11-32mm (1/4 to 3/4” & 7/16” to 1-1/4”) 7-19mm & 11-32mm (1/4 to 3/4” & 7/16” to 1-1/4”) 1/4″, 3/8″, and 1/2″ Drive
Material
Carbon Steel Carbon Steel Chrome Vanadium Steel Chrome Vanadium Steel PP, Rubber
Brand
Toolwiz Toolwiz Spurtar Spurtar Spurtar
Premium Quality: Circlip Pliers is made of quality carbon steel, heat-treated construction with the blackened finish for high strength and corrosion resistance
Precise Size: The master circlip pliers set designed for easy to reach into the narrow space with considerate size. Diameter of small tips: 0.06″/1.3mm. Length of jaws: 2″/53mm. The maximum length of opening jaws: 2/3″/17mm.
Wide Use: 90 Degree long nose snap ring pliers can be used to remove and install small snap ring up to 2″/53mm deep on the hydraulic master cylinders on motorcycles/cars/trucks.
Non-Slip: This retaining circlip pliers heavy duty mechanic tools one features Eco-friendly plastic dipped handle for easy and non-slip comfortable grip. No more extra hassle works.
Reliable Assurance: This Circlip pliers large long snap ring pliers is good fittings to share with your family and friends. If you have any questions with it, we provide professional and friendly pre-sales and after-sales service.
)
Customers say
Customers like the value and performance of the pliers. They mention that it’s well worth the money and does the job perfectly. That said, some complain about the quality.
AI-generated from the text of customer reviews
Reviewer: ab1487
Rating: 5.0 out of 5 stars
Title: Great for reaching deep brake calliper circlips
Review: Having fished around inside the calliper barrel with a pair of long nosed pliers for long enough I realised that I would need these. The following day, only five minutes after they were delivered, I was able to easily remove the circlip and finish the disassembly of a Mazda mx5 mk1 rear calliper. It’s not the most robust tool I’ve bought, but it’s been 26 years since the calliper was assembled in Japan and probably another 20 odd years until I’ll need the tool again. With garage labour rates at upwards of £75 an hour the cost of the tool represents about 10 minutes of labour at the garage. Good piece of kit if used sparingly.
Reviewer: Paul
Rating: 5.0 out of 5 stars
Title: Good quality
Review: Needed these to remove a deep seated circlip.
Reviewer: C D Smith
Rating: 4.0 out of 5 stars
Title: A bit flimsy, but works
Review: Did what I needed it to do, but its quite flexible, so not always easy to use. Decent value though
Reviewer: Wizzer
Rating: 5.0 out of 5 stars
Title: Snap Ring Plier
Review: Bought these to rebuild my motorcycle clutch Master Cylinder, because my other circlip pliers did not have a long enough reach to release the circlip that held the piston in place. These did the job admirably and still allowed me to have full vision of the job. Initially they felt a bit on the light weight side, but performed without any problems, Definitely recommended.
Reviewer: Amazon Customer
Rating: 1.0 out of 5 stars
Title: Low quality
Review: Product is poor quality. The tips of the arms were about 6mm different height made it impossible to remove any clips. Once I finally got the tips in to a clip when squeezed the arms twist and bend. No strength what so ever and made them useless for the job they are intended.
Reviewer: Harvey G.
Rating: 3.0 out of 5 stars
Title: The tool for the job.
Review: I bought these to take apart the brake cylinders of my SRAM Guide R brakes after the plastic pistons had swollen. There’s a small circlip that would be practically impossible to remove without this sort of tool. Normally I’d have a go with screwdrivers and bits of wire, but that was never going to work this time. The pliers were much larger than I expected, about 180mm long, but they’re perfect for the job. As others have said, I also needed to slightly file down the pins to remove the paint and a little metal so they would fit. That took a bit of trial and error and the pins look very thin, but they gripped OK and got the clip in and out with relative ease. Apparently they’re also useful if you ever need to strip the rear brake calipers of an MX5 too!
Reviewer: Amazon Customer
Rating: 5.0 out of 5 stars
Title: Must have in toolbox if you work on motorcycles.
Review: Working on triumph trident 900 and although I have various cir clip pliers none would reach down far enough to gain access.All good when refurbishing brake and clutch master cylinders.
Reviewer: Lawrence
Rating: 2.0 out of 5 stars
Title: Didn’t last long
Review: Was using these on internal circlip from a calliper piston.Managed to get a couple of uses out of these before one of the ends snapped off.
Reviewer: Peter
Rating: 5.0 out of 5 stars
Title:
Review: Girling 38 Bremse hinten überholen damit kein Problem!
Reviewer: AnnA
Rating: 5.0 out of 5 stars
Title:
Review: Come da descrizione.
Reviewer: Jan Karlsson
Rating: 5.0 out of 5 stars
Title:
Review: Perfekt till mitt jobb !
Reviewer: Philippe LAVOREL
Rating: 5.0 out of 5 stars
Title:
Review: conforme au descriptif
Reviewer: Jens
Rating: 5.0 out of 5 stars
Title:
Review: Works Great and is possible to “tune’
Product Description
Internal Cylinder Snap Ring Plier Long Nose Pliers Master Cylinder– Snap Ring 90 Degree Long Nose Pliers for Trucks Motorcycles Cars
90° Angled tip internal snap ring pliers make it easier to access hard to reach snap ringsHigh carbon steel finish has a tough and protective clear coating to help protect against corrosionLong nose pliers master cylinder retaining ring remover can be used on a variety of internal snap rings or circlipsSnap ring pliers can be used on 3/8 in to 2 in internal snap rings
Quality Spring
Constructed from high carbon steel which is widenly used to remove and install small snap rings up to 2″/53mm deep on the hydraulic master cylinders on motos/cars/trucks
Strong Tips
The long nose pliers set designed for easy reach into the narrow space with considerate size, ensuring you a more precise contorl of the snap ring removal
Anti-slip Handle
With ergonomic handles, the snap ring 90 degree long nose pliers can provide overall control and instant holding power. No more extra hassle works
Internal Cylinder Snap Ring Plier 90 Degree Bent Long Nose Pliers
Snap ring 90 degree long nose pliers are designed to remove and install the most common types of circlips and snap ring retainersThis heavy duty snap ring removal tool features high carbon steel which makes it durable and long-lastingThis long nose pliers master cylinder features friendly plastic dipped handle for easy and non-slip comfortable grip
Product Details Length: 6.6″ Tip: 90 Degree Material: Carbon steel Length of jaws: 2″ Diameter of small tips: 0.06″ Maximum of opening jaws: 0.67″
Add To Basket
Add To Basket
Add To Basket
Add To Basket
Add To Basket
Customer Reviews
4.0 out of 5 stars
223
4.6 out of 5 stars
1,381
4.5 out of 5 stars
2,489
4.5 out of 5 stars
2,489
4.5 out of 5 stars
84
Price
£9.99£9.99 £9.99£9.99 £16.99£16.99 £15.99£15.99 £43.99£43.99
Usage
Internal cylinder snap ring plier Hose clamp repairing Universal lug wrench Universal lug wrench Socket storage
Fitment
Universal Universal Universal Universal 1/4″, 3/8″, and 1/2″ Drive Socket (NOT Fit for Impact Sockets)
Size
90 Degree Max opening 1.38in/35mm 7-19mm & 11-32mm (1/4 to 3/4” & 7/16” to 1-1/4”) 7-19mm & 11-32mm (1/4 to 3/4” & 7/16” to 1-1/4”) 1/4″, 3/8″, and 1/2″ Drive
Material
Carbon Steel Carbon Steel Chrome Vanadium Steel Chrome Vanadium Steel PP, Rubber
Brand
Toolwiz Toolwiz Spurtar Spurtar Spurtar
Premium Quality: Circlip Pliers is made of quality carbon steel, heat-treated construction with the blackened finish for high strength and corrosion resistance
Precise Size: The master circlip pliers set designed for easy to reach into the narrow space with considerate size. Diameter of small tips: 0.06″/1.3mm. Length of jaws: 2″/53mm. The maximum length of opening jaws: 2/3″/17mm.
Wide Use: 90 Degree long nose snap ring pliers can be used to remove and install small snap ring up to 2″/53mm deep on the hydraulic master cylinders on motorcycles/cars/trucks.
Non-Slip: This retaining circlip pliers heavy duty mechanic tools one features Eco-friendly plastic dipped handle for easy and non-slip comfortable grip. No more extra hassle works.
Reliable Assurance: This Circlip pliers large long snap ring pliers is good fittings to share with your family and friends. If you have any questions with it, we provide professional and friendly pre-sales and after-sales service.
