8mm x 200mm Yellow Hardened Countersunk Torx Wood Timber Construction Screw with Flat Head High Performacne Carpenter Screws (Pack of 10)

Price: £7.99
(as of Oct 05,2024 19:50:50 UTC – Application:
We recommend to usecarpenter screws for timber to timber connections. The screws are equivalent to construction nails and do not require the material to be pre-drilled. They are available in many sizes, with length up to 400mm.
Deep TORX pocket enables better transfer of torque and prevents bit from sliding off.

feature:
1. Thread from the very beginning of the screw point – facilitates firm fixing point and prevents the point from sliding off.
2. Drilling point – enables slight screwing in without pre- drilling.
3. Cutting corrugations – break wood chips produced in screwing in and prevent wood from splitting.
4. Long mill – broadens a hole significantly reducing torque needed for screwing in.
5. Cutting ribs at bottom side of the screa head – facilitate sinking the screw head and levelling it with the material surface.
6. Deep TORX pocket – enables better transfer of torque and prevents bit from sliding off.
Size: 8mm x 200mm
Pack of 10
Material: Hardened carbon steel + yellow galvanization.
Drilling Tip (enables light screwing without pre-drilling)
Improved Smooth Cutter (the cutter is responsible for widening the hole in the fastened element⊲new cutter shape eliminates chip clogging, resulting in less frictional forces reduced tightening torque)
Cutting Notch (the cutting notch is along theentire length of the threadis responsible for breaking the chip and cutting the wood structure during screwing)
)

Reviewer: John Stelmasiak
Rating: 5.0 out of 5 stars
Title: Beast of a screw
Review: Great quality and drive in well, perfect for what i needed.

Reviewer: r constable
Rating: 5.0 out of 5 stars
Title: Great value for money
Review: Super quality

Reviewer: Eng
Rating: 4.0 out of 5 stars
Title: Good enough for most tasks.
Review: These screws are cheap but have reasonable strength. Noted they aren’t all absolutely straight, but for most jobs this isn’t an issue. I’ll buy them again as required.

Reviewer: Stephen
Rating: 5.0 out of 5 stars
Title: Great product
Review: Just the job for re securing a couple of sleepers in my garden. Just ensure you have the Correct angle on the screw head when fitting as the screw head can easily be worn down. Also a battery drill may not be sufficient depending on the type of material you are drilling through.

Reviewer: Merlin
Rating: 5.0 out of 5 stars
Title: As good as other products
Review: Did the job. No problems

Reviewer: F
Rating: 5.0 out of 5 stars
Title: Great quality
Review: Nice and easy

Reviewer: Pen Name
Rating: 5.0 out of 5 stars
Title: Great
Review: Did the job

Reviewer: Clive Thomas
Rating: 4.0 out of 5 stars
Title: what i was after
Review: size as requested

Application:
We recommend to usecarpenter screws for timber to timber connections. The screws are equivalent to construction nails and do not require the material to be pre-drilled. They are available in many sizes, with length up to 400mm.
Deep TORX pocket enables better transfer of torque and prevents bit from sliding off.

feature:
1. Thread from the very beginning of the screw point – facilitates firm fixing point and prevents the point from sliding off.
2. Drilling point – enables slight screwing in without pre- drilling.
3. Cutting corrugations – break wood chips produced in screwing in and prevent wood from splitting.
4. Long mill – broadens a hole significantly reducing torque needed for screwing in.
5. Cutting ribs at bottom side of the screa head – facilitate sinking the screw head and levelling it with the material surface.
6. Deep TORX pocket – enables better transfer of torque and prevents bit from sliding off.
Size: 8mm x 200mm
Pack of 10
Material: Hardened carbon steel + yellow galvanization.
Drilling Tip (enables light screwing without pre-drilling)
Improved Smooth Cutter (the cutter is responsible for widening the hole in the fastened element⊲new cutter shape eliminates chip clogging, resulting in less frictional forces reduced tightening torque)
Cutting Notch (the cutting notch is along theentire length of the threadis responsible for breaking the chip and cutting the wood structure during screwing)