6mm Porcelain Tile Drill Bit,Dry Diamond Drill Bits Set,Professional Drill Bit for for Glass, Granite,Ceramic Tile (not for Wood), Round Shank with Wax Core for Cool Heat Dissipation,5pcs

Price: £11.49
(as of Oct 23,2024 20:40:00 UTC –
STEPS TO USE:

1. Start Drilling the hole in an angle about 45 degrees to the surface,so the drill has the chance to start and will prevent the drill from slipping.

2. Slowly move the drill bit into a more up-right position and wobble the drill bit in the circular motion.

3. Do not need to apply much pressure, let the drill bit do the work, you will feel the drill bit break through the back of the glass or tile once the hole is completed.

4. Take care when using them as a bit can glaze and burn out if use too fast.

Notice:

1.It is important to perform a slight rotary movement when drilling!

2.Prohibited materials: cement, metal, tempered glass, plastic,etc.

3.If you are using a cordless screwdriver, make sure the speed is above 1600RPM.

4.When using a hand-held drill, ensure that the speed is above 2000-3000 rpm.

Dry Drilling Design – Unlike standard diamond tip drill bits for porcelain and glass that require water or lubricant to keep them cool ours have wax cores built,Our Diamond Drill Bit integrated with wax lubricant inside which melts while dry drilling and cools the cutting surface(Water can be used as additional cooling to prolong the life of the bit).
Precision Diamond Tip Drill Bits – These heavy-duty drill bits are crafted with stainless-steel and coated in a diamond particles to create a stronger, more effective bit head and to work with a wide range of delicate materials.
How To Use: First,Place the diamond drill at an angle of approx. 45° to the material surface and carefully start drilling;Second:Slowly move the drill bit into a more up-right position and wobble the drill bit In The Circular Motion.Please refer to the product picture!(For a longer service life, water or coolant is recommended).
Package Include – 5 Pieces of Dry Diamond Drill Bits Kit for drilling holes diameter of 6mm.This Diamond Drill Bits set comes with a portable storage case for convenient use and store.
Apply for – Great for drilling clean holes to hard materials : tiles, porcelain tiles, ceramic glass mirror marble masonry and brick (not for wood).
)

Reviewer: Mrs Anna coy
Rating: 5.0 out of 5 stars
Title: Very good
Review: I’m a bathroom fitter and if u use them as u should keeping them cool with a sponge and not over heating I can get around 6 to 8 holes on hard porcelain,ceramic tiles they last for ages,I used to tiles bit for around £25 each these are great value for money

Reviewer: ak4r4
Rating: 4.0 out of 5 stars
Title: Better than a lot of bits you get out there
Review: I have bought many tile drill bits from different brands but most don’t last, they all tend to give up after 2-3 holes. Until I found these i had been using the erbauer tile drill bits as those lasted quite long but they’re quite expensive compared to these. These are very good and last a good amount of holes depending on tile etc. These don’t exactly match erbauer but come close. Its worth buying these as you get 5 of these for the price of 1 erbauer bit. I will continue using these until they hold their quality

Reviewer: Willie White
Rating: 5.0 out of 5 stars
Title: Fantastic bits for drilling tiles
Review: Very good performance. Drilled through 10mm porcelain tiles very easily. Important to use slow speed and let the diamond tip do the work. Does multiple holes when used properly.

Reviewer: Jeff
Rating: 5.0 out of 5 stars
Title: Worked
Review: I needed to drill 2 holes in some porcelain tiles, which blunted my other tile drilling bit.One of these diamond bits managed to drill both holes. It looks like it would be capable of drilling more.I used water cooling

Reviewer: Mr Allan Thomson
Rating: 3.0 out of 5 stars
Title: Not as simple as on-line video
Review: I needed to drill lots of holes in my new porcelain tiles. A spade shaped tile bit managed one and a half holes before it broke. These tiles are VERY hard! So I sent for these diamond bits, and they arrived promptly. An on line video showed how to use them. They don’t have a point, so you start with the bit angled until it bites, then straighten up, and if the video is to be believed, a few seconds later you have a hole! Not so. It’s difficult to get an accurate position because the bit doesn’t have a point, and after a long period, not much progress on the first hole. Tried using little force – little impact. Tried using plenty force – big heat, little progress. Then tried water cooling and plenty force – ureka! Slow progress and ultimate success. Just another 15 to go! But eventually complete. What did I do wrong?

Reviewer: Darren M
Rating: 5.0 out of 5 stars
Title: Excellent a+++++
Review: These bits are unbelievable for the money. I normally but these from Screwfix but they have just gone up to £18 for 1. So thought I give these a try and for the money wasn’t expecting much. I needed to drill six holes in porcelain tiles and done it all with 1 bit. Yes towards the last couple of holes it was not as quick and could of done with a new bit but for the money I would of been happy if it used 1 bit per hole. How on earth there are a few bad reviews on this I don’t know. Maybe people that have never drilled porcelain and don’t realise how hard it is and how quick it destroys drill bits. Will definitely be ordering many more of these again when I need then. I not one for writing many reviews but had to on this. Amazing bits for the money

Reviewer: Lynsey Hitchings
Rating: 1.0 out of 5 stars
Title: Really Poor
Review: I was surprised at the great reviews these have received. My experience was really disappointing. I had 12 holes to drill in a customers property and the pack of 5 drills didn’t last long enough to drill 8 of them. They all remained remarkably cool in use and grind well initially but all of them failed miserably with the tips polishing to a smooth surface very quickly. I expected them to be a disposable product but was hoping for more longevity than that.

Reviewer: Victoria
Rating: 4.0 out of 5 stars
Title: They do the job
Review: Previous bits I have bought didn’t last a single hole in our porcelain tiling. I drilled 4 holes with just one of these bits and it never showed any signs of overheating. You just need to take it steady and let your drill and bit do the work. Be aware that you need a drill that can handle a steady minimum of 2000 rpm. My modern battery driven drills for home DIY operate at slower speeds, luckily I had my trusty old wired Bosch

STEPS TO USE:

1. Start Drilling the hole in an angle about 45 degrees to the surface,so the drill has the chance to start and will prevent the drill from slipping.

2. Slowly move the drill bit into a more up-right position and wobble the drill bit in the circular motion.

3. Do not need to apply much pressure, let the drill bit do the work, you will feel the drill bit break through the back of the glass or tile once the hole is completed.

4. Take care when using them as a bit can glaze and burn out if use too fast.

Notice:

1.It is important to perform a slight rotary movement when drilling!

2.Prohibited materials: cement, metal, tempered glass, plastic,etc.

3.If you are using a cordless screwdriver, make sure the speed is above 1600RPM.

4.When using a hand-held drill, ensure that the speed is above 2000-3000 rpm.

Dry Drilling Design – Unlike standard diamond tip drill bits for porcelain and glass that require water or lubricant to keep them cool ours have wax cores built,Our Diamond Drill Bit integrated with wax lubricant inside which melts while dry drilling and cools the cutting surface(Water can be used as additional cooling to prolong the life of the bit).
Precision Diamond Tip Drill Bits – These heavy-duty drill bits are crafted with stainless-steel and coated in a diamond particles to create a stronger, more effective bit head and to work with a wide range of delicate materials.
How To Use: First,Place the diamond drill at an angle of approx. 45° to the material surface and carefully start drilling;Second:Slowly move the drill bit into a more up-right position and wobble the drill bit In The Circular Motion.Please refer to the product picture!(For a longer service life, water or coolant is recommended).
Package Include – 5 Pieces of Dry Diamond Drill Bits Kit for drilling holes diameter of 6mm.This Diamond Drill Bits set comes with a portable storage case for convenient use and store.
Apply for – Great for drilling clean holes to hard materials : tiles, porcelain tiles, ceramic glass mirror marble masonry and brick (not for wood).