100 ml Äronix drill grease chisel paste chisel hammer drill hammer SDS Plus SDS MAX grease copper paste

Price: £10.76
(as of Aug 15,2024 00:15:41 UTC – ÄRONIX drill and chisel paste, 100 ml special paste for insertion tools on hydraulic and chisel hammers, as well as on impact drills and hammer drills from e.g. Bosch, Hilti, Dewalt, Makita etc. Whether SDS Plus, SDS Max, spline shaft, hexagonal or similar. Absolute professional quality. You will receive a dispenser with 100 ml capacity. Other container sizes can be found in the shop under “lubricants”. Application: simply apply some paste on the insertion end of the drill / chisel. Advantages: copper mixture. Absolute professional quality. – Reduces wear by up to 30% – High pressure absorption capacity – Good corrosion protection – Prevents seeping due to high operating temperatures – Very good water resistance – Reduces wear – Easy disassembly properties increases the service life and offers excellent wear protection, even at temperatures up to 1,100 °C. Adhesive and water resistant. Can also be used underwater. Data colour: copper-coloured. Shape: pasty. Odour-mineral oil-like, drip point 260 °C. Flashpoint. Not applicable. Temperature best. :-20 °C to 1,100 °C Densteca. 0.9 g/cm³ at 20 °C. Labelling dangerous substances: not subject to labelling. GGVE/GGVS/RID/ADR: dto. GGVSee / IMDG code: dto. Classification of water-hazardous substances WGK 1: Not hazardous goods within the terms of transport regulations.
Dispenser with 100 ml special paste for insertion tools on hydraulic and hammer hammers.
Whether SDS Plus, SDS Max, spline shaft, hexagonal or similar.
Reduces wear by up to 30%; good corrosion protection.
Temperature resistant: -20 °C to 1,100 °C.
)

ÄRONIX drill and chisel paste, 100 ml special paste for insertion tools on hydraulic and chisel hammers, as well as on impact drills and hammer drills from e.g. Bosch, Hilti, Dewalt, Makita etc. Whether SDS Plus, SDS Max, spline shaft, hexagonal or similar. Absolute professional quality. You will receive a dispenser with 100 ml capacity. Other container sizes can be found in the shop under “lubricants”. Application: simply apply some paste on the insertion end of the drill / chisel. Advantages: copper mixture. Absolute professional quality. – Reduces wear by up to 30% – High pressure absorption capacity – Good corrosion protection – Prevents seeping due to high operating temperatures – Very good water resistance – Reduces wear – Easy disassembly properties increases the service life and offers excellent wear protection, even at temperatures up to 1,100 °C. Adhesive and water resistant. Can also be used underwater. Data colour: copper-coloured. Shape: pasty. Odour-mineral oil-like, drip point 260 °C. Flashpoint. Not applicable. Temperature best. :-20 °C to 1,100 °C Densteca. 0.9 g/cm³ at 20 °C. Labelling dangerous substances: not subject to labelling. GGVE/GGVS/RID/ADR: dto. GGVSee / IMDG code: dto. Classification of water-hazardous substances WGK 1: Not hazardous goods within the terms of transport regulations.
Dispenser with 100 ml special paste for insertion tools on hydraulic and hammer hammers.
Whether SDS Plus, SDS Max, spline shaft, hexagonal or similar.
Reduces wear by up to 30%; good corrosion protection.
Temperature resistant: -20 °C to 1,100 °C.