1 x Silicone Sealant Gun Suitable for 310 & 410 ml EU3 & EU4 Cartridges aka Skeleton Mastic/Caulk Applicator – Quantity Discount Available

Price: £8.29
(as of Apr 06,2024 10:17:11 UTC – 1 x Silicone Skeleton Gun
(Suitable for 310ml & 400ml EU3 cartridges)
Use with Silicone Sealant, Mastic, Caulk and Adhesive cartridges!
These skeleton guns can be used with standard 310ml & 400ml EU3 cartridges. They are lightweight and made from b steel, they are comfortable to use for long periods of use and can take a bit of punishment.
Using the Skeleton Gun
Fitting the cartridge…
Retract the plunger by pressing the thumb plate and pulling the plunger back as far as it will go. Feed the nozzle of the cartridge through the hole at the end of the gun so that the cartridge fits into the collar. Then press the trigger and repeat until the plunger enters the hollow at the rear of the cartridge.
Using the gun
The sprung trigger is used to feed the plunger down the gun and apply pressure to the cartridge, thus pushing the sealant through the nozzle. To release the pressure you need only press the thumb plate and pull back on the plunger!
Skeleton Gun – Fits standard EU3 310ml and 400 ml cartridges
Strong and Lightweight – Steel frame and trigger
Quality design – comfortable, ergonomic sprung trigger
Sprung Thumb Plate – locks and unlocks the plunger
)

1 x Silicone Skeleton Gun
(Suitable for 310ml & 400ml EU3 cartridges)
Use with Silicone Sealant, Mastic, Caulk and Adhesive cartridges!
These skeleton guns can be used with standard 310ml & 400ml EU3 cartridges. They are lightweight and made from b steel, they are comfortable to use for long periods of use and can take a bit of punishment.
Using the Skeleton Gun
Fitting the cartridge…
Retract the plunger by pressing the thumb plate and pulling the plunger back as far as it will go. Feed the nozzle of the cartridge through the hole at the end of the gun so that the cartridge fits into the collar. Then press the trigger and repeat until the plunger enters the hollow at the rear of the cartridge.
Using the gun
The sprung trigger is used to feed the plunger down the gun and apply pressure to the cartridge, thus pushing the sealant through the nozzle. To release the pressure you need only press the thumb plate and pull back on the plunger!
Skeleton Gun – Fits standard EU3 310ml and 400 ml cartridges
Strong and Lightweight – Steel frame and trigger
Quality design – comfortable, ergonomic sprung trigger
Sprung Thumb Plate – locks and unlocks the plunger